Cable Management and Identification Solutions

Rev. 0

Issue link: http://www.e-digitaleditions.com/i/103642

Contents of this Issue

Navigation

Page 109 of 255

Routing and Protection Wiring Duct Pro-Duct Wiring Duct HellermannTyton's Pro-Duct wiring duct efficiently routes and protects wire and cable. Manufactured from high impact, rigid PVC, Pro-Duct includes solid, slotted and high density slotted styles. Pro-Duct comes in standard colors of white, gray and black in 6 foot lengths. Blue wiring duct is also available in a variety of standard sizes. Other colors are available. Contact HellermannTyton for minimum volume requirements. Pro-Duct Features All styles of Pro-Duct wiring duct (solid, slotted and high density slotted) are designed with many installer preferred features: - Cover is supplied with a film which protects against scratches and is writable for temporary identification during installation. Smooth edges protect installer and wires from abrasion. Cover is flush with the side of the duct for increased wire capacity. It also allows for tight, side-by-side placement. No cover slippage. The covers are provided with a non-slip lining. This ensures that the covers remain in place during vibration, yet they easily snap on and off, offering ready access to the wire run. Mounting holes are designed for installation versatility. Elongated mounting holes allow for changes in panel designs and installation flexibility. Mounting holes are standard. Contact HellermannTyton for duct without mounting holes. Enhanced wire capacity helps maximize space within panels. Interchangeable covers between solid, slotted, and high density slotted styles reduce inventory and increase versatility. Professional appearance increases panel's overall neatness. Pro-Duct is U.L. Recognized, CSA Certified, CE Compliant and carries a U.L. flame rating of 94V0. Pro-Duct is lead-free and is made with flame retardant PVC. MADE THE MADE IN THE USA Solid Wall Duct Lead Free File # E64139 File # 49249 Solid wall duct is designed for straight wire runs where break-outs are not required. Solid Wall Duct - Smooth edges Solid wall duct is designed for straight wire runs where break-outs are not required. - Non-slip cover - Smooth edges - Professional appearance - Non-slip cover - Professional appearance Slotted Wall Duct Slotted wallWallfeatures break-away fingers which provide additional Slotted duct Duct access for wire leads. Slotted wall duct features break-away fingers which provide additional Slottedfor wire leads. access wall duct is manufactured with two continuous score lines. The firstwall duct isis at the base of the two continuous score lines.to be bent and Slotted score line manufactured with finger, allowing the finger broken away when a greater opening is required. The second score line is lower The first score line is at the base of the finger, allowing the finger to be bent and allowing a section of the sidewall to be easily removed by cutting the sidewall down broken away when a greater opening is required. The second score line is lower to the lower score line. Use HellermannTyton's TDNT notching tool and snap out the allowing a section of the sidewall to be easily removed by cutting the sidewall down desired section. Both score lines provide smooth edges to ensure worker safety. to the lower score line. Use HellermannTyton's TDNT notching tool and snap out the Strong fingers prevent unwanted breaking. desired section. Both score lines provide smooth edges to ensure worker safety. The fingers areprevent unwanted breaking. Strong fingers easily deflected outward, allowing ready positioning of the wires within the slotted wall duct. The fingers are easily deflected outward, allowing ready positioning of the wires Restricted slotted design in within the openingwall duct. the finger of the duct helps keep wires in place. Restriction also prevents unintended removal of wires and permits any individual wire to be traced without disconnection. 109 F o r p ro d u c t info r mat i o n v is i t o r w w w. h e l l e r m a n n .t y t o n . c o m o r c a ll 8 0 0 - 5 3 7-1512

Articles in this issue

Links on this page

view archives of Cable Management and Identification Solutions - Rev. 0