Cable Management and Identification Solutions

Rev. 0

Issue link: http://www.e-digitaleditions.com/i/103642

Contents of this Issue

Navigation

Page 228 of 255

Identification Systems Pre - Printed Installation L abels Pre-printed Labels HellermannTyton pre-printed and thermal transfer printable labels have a special high-bond adhesive for use on both enamel and powder coat painted surfaces. Labels are a laminated construction for maximum UV stability. Where required, labels are reflective per NEC and IFC standards. Labels meet the requirements of UL969. Material Data Material 443/552 UV Stable Flexible White . Vinyl w/ Acrylic Laminate Operating Temperature -40 °F (-40 °C) to 175 °F (79 °C) Min. Application Temp. 50 °F (10 °C) Liner 78# White Bleached Paper 596-00233 Certifications UL969 596-00232 596-00231 596-00234 596-00258 596-00235 596-00236 Product Selection Article No. Part No. Type Roll Description Qty. 596-00233 596-00233 WESHLBL 50 WARNING - ELECTRICAL SHOCK HAZARD 3.75" (95.25mm) X 2.0" (50.8mm) 596-00232 596-00232 WESHLBLDC 50 WARNING - ELECTRICAL SHOCK HAZARD W/DC 3.75" (95.25mm) X 2.5" (63.5mm) 596-00234 596-00234 WGCME 50 WARNING - GROUNDED CONDUCTORS MAY BE ENERGIZED 4.12" (104.6mm) X 2" (50.8mm) 596-00258 596-00258 WDCCU 50 WARNING - DC CONDUCTORS MAY BE ENERGIZED 4.12" (104.6mm) X 2" (50.8mm) 596-00235 596-00235 WTOPVLBL 50 WARNING - TURN OFF PV AC PRIOR TO WORKING INSIDE PANEL 4.12" (104.6mm) X 2" (50.8mm) 596-00231 596-00231 WDPSLBL 50 WARNING - DUAL POWER SOURCE 4.12" (104.6mm) X .75" (19.05mm) 596-00236 596-00236 CBACKFED 50 CAUTION - PV SYSTEM CIRCUIT BREAKER IS BACKFED 4.12" (104.6mm) X .75" (19.05mm) Use Part No. for ordering and Type for specification. Reflective Rooftop Label Designed to meet NEC2011 Section 690.4(F) as interpreted by the International Association of Electrical Inspectors (IAEI), HellermannTyton offers an aluminum and vinyl label designed for use on almost any type of roof shingle. Mount via a pre-cut aluminum plate with aluminum clips (both supplied with label) to standard tar shingles, or bend, shape and fasten with construction adhesive or grommet screws on composite or wooden roofing. Label text is reflective to meet IFC requirements. Material Data Product Selection Material 242/552 UV Stable Reflective Vinyl . w/ Acrylic Laminate on Aluminmum Operating Temperature -40 °F (-40 °C) to 175 °F (79 °C) Min. Application Temp. 50 °F (10 °C) Liner Certifications Article Part No. Type No. Description PHOTOVOLTAIC 596-00257 596-00257 PVPSRTM Polyethylene Coated Paper UL969 Pkg. Qty. 1 POWER SOURCE 6.75" (171.45mm) X 2.75" (69.85mm) Use Part No. for ordering and Type for specification. 228

Articles in this issue

Links on this page

view archives of Cable Management and Identification Solutions - Rev. 0