Cable Management and Identification Solutions

Rev. 0

Issue link: http://www.e-digitaleditions.com/i/103642

Contents of this Issue

Navigation

Page 76 of 255

Bundling and Securing C a b l e T i e To o l s EVO7™ Tool H At the heart of the EVO 7 lies revolutionary, patent-pending Tension/ Lock/Cut (TLC) technology that dramatically changes how cable ties are cut. The key is TLC's ability to lock each tie in place at the desired tension prior to cutting. Because the tension is fixed at the trigger when squeezing begins, only a minimum of hand force and a shorter range of motion is required to cut through each tie. A. Easy Blade Replacement One-way blade installation makes on-site blade replacement a snap. B. Long Narrow Nose Allows you to cut cable ties in the tightest of spaces quickly and easily. C. Trigger Made from soft-grip, non-slip material, the contoured full-length trigger incorporates individual finger grips to accommodate multiple hand sizes. D. Integrated Hanger Hook Allows easy storage and accessibility. G A B F E E. Contoured ErgonomicallyEngineered Handle Crafted from soft-grip, non-slip material, the grip features an integrated air cushion that conforms to your hand for maximum comfort. F. Tension Knob Rotate the knob to any of 33 precise pre-set tension settings. G. Thumb Lock To unlock the tension knob, slide the non-slip thumb lock forward, adjust to desired tension setting and release the thumb lock to lock in place. D C H. Impact-Resistant Housing Made from durable, light-weight composite, the EVO 7 weighs 9.7 oz. (.275 kg), resists chemical contamination and is built to stand up to the toughest industrial environments. Product Selection Article No. Part No. Type Description Cable Tie Series Pkg. Qty. 110-70083 110-70083 EVO7 Standard hand span 3.5" (90mm). All 18-80 lb. Series Ties 1 110-70084 110-70084 EVO7SP Short hand span 3.1" (80mm). All 18-80 lb. Series Ties 1 110-70106 110-70106 BLADEKT Blade replacement kit for EVO7 and EVO7SP. Contains (1) Blade & (1) Nose piece screw. 1 110-70091 110-70091 T8SD T8 Star Driver for removal/insertion of tension lock out screw. 1 110-70089 110-70089 CALTOOL Calibration tool to be used for removal of cap at back of tension knob and for calibrating tool on site. 1 110-99000 110-99000 UC200 UC200 Tension Gauge for tensile read outs when calibrating tools on site. 1 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification. 76

Articles in this issue

Links on this page

view archives of Cable Management and Identification Solutions - Rev. 0