Cable Management and Identification Solutions

LITPDCMIS Rev1

Issue link: http://www.e-digitaleditions.com/i/103642

Contents of this Issue

Navigation

Page 107 of 243

107 F o r p r o d u c t i n f o r m a t i o n v i s i t o r w w w. h e l l e r m a n n .t y t o n . c o m o r c a l l 8 0 0 - 5 3 7-1512 B u n d l i n g a n d S e c u r i n g M o u n t s E n g i n e e r e d F a s t e n i n g S o l u t i o n s B u n d l e S e p a r a t i o n P r o d u c t s 9 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 H L W swivels Article No. Part No. Type Bundle Ø Length (L) Width (W) Height (H) Color Pkg. Qty. Cable Tie Series in. (mm) in. (mm) in. (mm) in. (mm) 151-06502 DSWS50HSK2 DSWS5 T50 - T250 .625" - 6" (15.8 - 152.4) 1.6 (40.6) 1 (25.4) .93 (23.6) Black 50 151-06501 DSWS50HSH1 DSWS5 T50 - T250 .625" - 6" (15.8 - 152.4) 1.6 (40.6) 1 (25.4) .93 (23.6) Black 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Product Selection Material Polyamide 6.6 heat stabilized (PA66HS) Operating Temperature -40 °F to +221 °F (-40 °C to +105 °C) continuous Flammability UL94 V2 Material Data Dual Swivel Saddle Spacer DSWS5 These saddle spacers are installed between two bundles (such as wires, cables, hoses, tubing, conduit, etc.) to separate them and prevent chafing and wear. The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle. Cable ties, which secure the bundles, are used with the spacers. The DSWS5 accepts bundle diameters ranging from .625 inches to 6 inches. The DSWS5 provides a .93 inch (23.6 millimeter) separation between bundles. The dual swivel saddle spacers accommodate cable ties up to 1/2" wide. Dual Swivel Saddle Spacer DSWS5

Articles in this issue

Links on this page

view archives of Cable Management and Identification Solutions - LITPDCMIS Rev1