Cable Management and Identification Solutions

65 F o r p r o d u c t i n f o r m a t i o n v i s i t o r w w w. h e l l e r m a n n .t y t o n . c o m o r c a l l 8 0 0 - 5 3 7-1512 B u n d l i n g a n d S e c u r i n g C a b l e T i e s - S p e c i a l P u r p o s e E n g i n e e r e d F a s t e n i n g S o l u t i o n s F a s t e n e r s 34 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Article No. Part No. Type Min. Tensile Strength Length (L) Max. Ø Bundle Width (W) Color Pkg. Qty. lbs. (N) in. (mm) in. (mm) in. (mm) BT105 Button Head Ties 132-00010 132-00010 BT105R 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00011 132-00011 BT105L 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT105 Button Head Ties with Pilot Bushings 132-00006 132-00006 BT105RP 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00007 132-00007 BT105LP 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT130 Button Head Ties with Retainers and Pilot Bushings 132-00008 132-00008 BT130RDP 130 lbs (578) 10.51″ (267.0) 2.87″ (73) .30″ (7.6) Black 50 132-00009 132-00009 BT130LDP 130 lbs (578) 15″ (381.5) 4.33″ (110) .30″ (7.6) Black 50 Installation tools - MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Product Selection New and Improved Features The button head tie offers many improved features for added durability and installation ease. A. Pilot bushing - protects the strap from abrasion on the mounting hole edge B. Ribs - increased ribs added to the bottom of the head for added durability C. Strap - more radiused edges for added flexibility D. Serrations - redesigned serrations and wedge provide optimal strength when seated in the head E. Retainers - lower retainers on BT130 hold HellermannTyton's MSBT120 saddle mounts in place during assembly. Button Head Ties The button head tie is a two piece tie providing for parallel entry and exit through the head. The strap contains serrations on both sides and has two opposed pawls recessed within a domed head. This design allows the strap to be directed clockwise or counter- clockwise prior to insertion into the head, enabling bi-directional looping. A B C D E MK9 Tool - See page 84 Wedge Note: In order to assure the strap is fully locked in its final secure position, the installer must make sure that the "wedge" located at the end of the strap, is fully seated in the button, and flush with the top of the button. The MK9 cable tie tool is recommended and end use testing is advised. Material Polyamide 6.6 heat stabilized (PA66HS) Color Black Operating Temperature -40 °F to +221 °F (-40 °C to +105 °C) continuous Flammability UL94 V2 Material Polyamide 6.6 impact modified, heat stabilized, UV resistant (PA66HIRHS) Color Black Operating Temperature -40 °F to +230 °F (-40 °C to +110 °C) continuous Flammability UL94 HB Material Data- Button Head Material Data - Strap E n g i n e e r e d F a s t e n i n g S o l u t i o n s F a s t e n e r s 34 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Article No. Part No. Type Min. Tensile Strength Length (L) Max. Ø Bundle Width (W) Color Pkg. Qty. lbs. (N) in. (mm) in. (mm) in. (mm) BT105 Button Head Ties 132-00010 132-00010 BT105R 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00011 132-00011 BT105L 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT105 Button Head Ties with Pilot Bushings 132-00006 132-00006 BT105RP 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00007 132-00007 BT105LP 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT130 Button Head Ties with Retainers and Pilot Bushings 132-00008 132-00008 BT130RDP 130 lbs (578) 10.51″ (267.0) 2.87″ (73) .30″ (7.6) Black 50 132-00009 132-00009 BT130LDP 130 lbs (578) 15″ (381.5) 4.33″ (110) .30″ (7.6) Black 50 Installation tools - MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Product Selection New and Improved Features The button head tie offers many improved features for added durability and installation ease. A. Pilot bushing - protects the strap from abrasion on the mounting hole edge B. Ribs - increased ribs added to the bottom of the head for added durability C. Strap - more radiused edges for added flexibility D. Serrations - redesigned serrations and wedge provide optimal strength when seated in the head E. Retainers - lower retainers on BT130 hold HellermannTyton's MSBT120 saddle mounts in place during assembly. Button Head Ties The button head tie is a two piece tie providing for parallel entry and exit through the head. The strap contains serrations on both sides and has two opposed pawls recessed within a domed head. This design allows the strap to be directed clockwise or counter- clockwise prior to insertion into the head, enabling bi-directional looping. A B C D E MK9 Tool - See page 84 Wedge Note: In order to assure the strap is fully locked in its final secure position, the installer must make sure that the "wedge" located at the end of the strap, is fully seated in the button, and flush with the top of the button. The MK9 cable tie tool is recommended and end use testing is advised. Material Polyamide 6.6 heat stabilized (PA66HS) Color Black Operating Temperature -40 °F to +221 °F (-40 °C to +105 °C) continuous Flammability UL94 V2 Material Polyamide 6.6 impact modified, heat stabilized, UV resistant (PA66HIRHS) Color Black Operating Temperature -40 °F to +230 °F (-40 °C to +110 °C) continuous Flammability UL94 HB Material Data- Button Head Material Data - Strap E n g i n e e r e d F a s t e n i n g S o l u t i o n s F a s t e n e r s 34 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Article No. Part No. Type Min. Tensile Strength Length (L) Max. Ø Bundle Width (W) Color Pkg. Qty. lbs. (N) in. (mm) in. (mm) in. (mm) BT105 Button Head Ties 132-00010 132-00010 BT105R 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00011 132-00011 BT105L 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT105 Button Head Ties with Pilot Bushings 132-00006 132-00006 BT105RP 105 lbs (467) 9.63″ (244.4) 2.62″ (66.7) .22″ (5.6) Black 50 132-00007 132-00007 BT105LP 105 lbs (467) 15″ (381.5) 4.33″ (110) .22″ (5.6) Black 50 BT130 Button Head Ties with Retainers and Pilot Bushings 132-00008 132-00008 BT130RDP 130 lbs (578) 10.51″ (267.0) 2.87″ (73) .30″ (7.6) Black 50 132-00009 132-00009 BT130LDP 130 lbs (578) 15″ (381.5) 4.33″ (110) .30″ (7.6) Black 50 Installation tools - MK9, MK9HT, MK9P. Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. Product Selection New and Improved Features The button head tie offers many improved features for added durability and installation ease. A. Pilot bushing - protects the strap from abrasion on the mounting hole edge B. Ribs - increased ribs added to the bottom of the head for added durability C. Strap - more radiused edges for added flexibility D. Serrations - redesigned serrations and wedge provide optimal strength when seated in the head E. Retainers - lower retainers on BT130 hold HellermannTyton's MSBT120 saddle mounts in place during assembly. Button Head Ties The button head tie is a two piece tie providing for parallel entry and exit through the head. The strap contains serrations on both sides and has two opposed pawls recessed within a domed head. This design allows the strap to be directed clockwise or counter- clockwise prior to insertion into the head, enabling bi-directional looping. A B C D E MK9 Tool - See page 84 Wedge Note: In order to assure the strap is fully locked in its final secure position, the installer must make sure that the "wedge" located at the end of the strap, is fully seated in the button, and flush with the top of the button. The MK9 cable tie tool is recommended and end use testing is advised. Material Polyamide 6.6 heat stabilized (PA66HS) Color Black Operating Temperature -40 °F to +221 °F (-40 °C to +105 °C) continuous Flammability UL94 V2 Material Polyamide 6.6 impact modified, heat stabilized, UV resistant (PA66HIRHS) Color Black Operating Temperature -40 °F to +230 °F (-40 °C to +110 °C) continuous Flammability UL94 HB Material Data- Button Head Material Data - Strap Button Head Ties Button Head ties provide a one-piece mounting solution for bundles, eliminating the need for additional mounts and fasteners. The strap contains serrations on both sides and has two opposing pawls recessed within the domed head, enabling the strap to be directed either way through the button head. These key features of the Button Head Ties present ease of installation and high durability. A. Pilot Bushing – Protects the strap from abrasion on the mounting hold edge B. Ribs – Adds stability on the bottom of the head C. Strap – Enhances flexibility due to its edge radiuses D. Serrations and Wedge – Provides optimal strength when the strap serrations are seated in the head E. Lower Retainers – Holds HellermannTyton's MSBT120 saddle mounts in place during assembly (BT130 only) MK9 Tool - See page 77 Note: In order to assure the strap is fully locked in its final secure position, the installer must make sure that the "wedge" located at the end of the strap is fully seated in the button and flush with the top of the button. The MK9 cable tie tool is recommended and end use testing is advised.

• Cover