Cable Management and Identification Solutions

E n g i n e e r e d F a s t e n i n g S o l u t i o n s I n t r o d u c t i o n 4 w w w . h e l l e r m a n n . t y t o n . c o m | 1 - 8 0 0 - 5 3 7 - 1 5 1 2 Optimum storage conditions for cable ties made of polyamide (PA) HellermannTyton cable ties and mounts are manufactured from high-quality polyamide (PA). This material is mainly processed using injection molding, but can also be extruded. Polyamide is a hygroscopic material. This means that the material absorbs and loses moisture. For optimum handling of cable ties, it is important that the material is in a condition of equilibrium with a water content of approximately 2.5%. The packaging used by HellermannTyton ensures that the water content in the material remains constant. Therefore, it is important to store the products in their original packaging to preserve the quality of the ties and mounts. Once opened you should use the ties as quickly as possible. Do not expose the product to direct sunlight Store the product away from direct sources of heat Ideal storage conditions: 73 °F ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ 20 30 40 5 0 60 70 80 90 100 50% 50% relative humidity WARRANTY POLICY QUALITY CERTIFICATIONS HellermannTyton products are warranted to be free from defects in material and workmanship at the time sold by us; but our obligation under this warranty and that of the seller is limited to the replacement of the product, and neither we nor the seller are bound by any other warranty, expressed, implied or statutory. Under no circumstances are we or the seller liable for any loss, damage, expenses or consequential damages of any kind arising out of the use or inability to use these products. All are sold with the understanding that the user will test them in actual use and determine their adaptability for the intended uses. The above warranties and remedies are exclusive and in lieu of all other warranties and remedies whatsoever, express or implied, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose which HellermannTyton expressly disclaims. HellermannTyton is certified to TS 16949, ISO 9001:2000 and ISO 14001 RoHS/WEEE The scope of the European Union's Restriction of Hazardous Substances (RoHS) and the Waste Electrical and Electronic Equipment (WEEE) directives covers all electrical and electronic equipment (and their components) sold into the European Union. Throughout this catalog, you will see designations where materials are RoHS compliant. If you have specific questions or need compliance information related to the RoHS or WEEE directives, please go to our website link: www.hellermann.tyton.com/rohs.asp or email us at: rohs@htamericas.com. A HellermannTyton representative will promptly respond to your request. E n g i n e e r e d F a s t e n i n g S o l u t i o n s I n t r o d u c t i o n Optimum storage conditions for cable ties made of polyamide (PA) HellermannTyton cable ties and mounts are manufactured from high-quality polyamide (PA). This material is mainly processed using injection molding, but can also be extruded. Polyamide is a hygroscopic material. This means that the material absorbs and loses moisture. For optimum handling of cable ties, it is important that the material is in a condition of equilibrium with a water content of approximately 2.5%. The packaging used by HellermannTyton ensures that the water content in the material remains constant. Therefore, it is important to store the products in their original packaging to preserve the quality of the ties and mounts. Once opened you should use the ties as quickly as possible. Do not expose the product to direct sunlight Store the product away from direct sources of heat Ideal storage conditions: 73 °F ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ ❘ ❘ ❘ ❘ ❙ 20 30 40 5 0 60 70 80 90 100 50% 50% relative humidity WARRANTY POLICY QUALITY CERTIFICATIONS HellermannTyton products are warranted to be free from defects in material and workmanship at the time sold by us; but our obligation under this warranty and that of the seller is limited to the replacement of the product, and neither we nor the seller are bound by any other warranty, expressed, implied or statutory. Under no circumstances are we or the seller liable for any loss, damage, expenses or consequential damages of any kind arising out of the use or inability to use these products. All are sold with the understanding that the user will test them in actual use and determine their adaptability for the intended uses. The above warranties and remedies are exclusive and in lieu of all other warranties and remedies whatsoever, express or implied, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose which HellermannTyton expressly disclaims. HellermannTyton is certified to TS 16949, ISO 9001:2000 and ISO 14001 RoHS/WEEE The scope of the European Union's Restriction of Hazardous Substances (RoHS) and the Waste Electrical and Electronic Equipment (WEEE) directives covers all electrical and electronic equipment (and their components) sold into the European Union. Throughout this catalog, you will see designations where materials are RoHS compliant. If you have specific questions or need compliance information related to the RoHS or WEEE directives, please go to our website link: www.hellermann.tyton.com/rohs.asp or email us at: rohs@htamericas.com. A HellermannTyton representative will promptly respond to your request. 00_Intro_alternate.qxp 4/16/2007 1:09 PM Page 4 7 B u n d l i n g a n d S e c u r i n g M a t e r i a l s I n f o r m a t i o n

• Cover