Network Cabling Solutions

LITPDNCS Rev4

Issue link: http://www.e-digitaleditions.com/i/137513

Contents of this Issue

Navigation

Page 205 of 246

Network Cabling Solutions Cable Management Accessories Aerial Support Spacer Ties Aerial support spacer ties are two piece ties designed for standard spacing applications. The strap is molded from special high impact polyamide 6.6. The support spacer and head are made from a high density outdoor black polyproplene. Both materials offer resistance to sunlight, saltwater, and harsh chemical enviornments. Place the spacer between the cable and strand. Wrap the tie strap around the cable and through the backside loop. Electrician pliers may be used to snug* the installation and snip tail. Pull the spacer snug to the cable and wrap the tie strap around the strand. Pass the tie strap through the locking buckle. * As the cable and strand expand at different rates, the installation should not be tight but just snug. HellermannTyton aerial support spacer ties may be released by inserting a screwdriver under the locking ratchet of the buckle. Product Selection Min. Tensile Strength Article No. Part No. Type lbs. (N) Length (L) in. (mm) Max. Ø Bundle in. (mm) Width (W) in. (mm) Color Pkg. Qty. 111-98500 TAS100MWS TAS100 100 lbs (445) 10.7² (272.3) 2.75² (70.0) .50² (12.7) Black 500 111-98501 TAS100RWS TAS100 100 lbs (445) 8.25² (209.6) 1.75² (44.5) .50² (12.7) Black 500 148-00022 TAS100LWS TAS100LWS 100 lbs (445) 16² (420) 4.5² (115) .50² (12.7) Black 500 Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes. 204 For product information visit www.hellermann.tyton.com or call 800.537.1512

Articles in this issue

Links on this page

view archives of Network Cabling Solutions - LITPDNCS Rev4