Issue link: http://www.e-digitaleditions.com/i/137513
Network Cabling Solutions RapidNet RapidNet Legacy Fiber Solutions RapidNet Legacy Solutions offer the same performance Fiber Options as the RNG Series but utilize the first release of the - 62.5/125 µm (OM1 Fiber) cassette. The legacy cassette and system is for use in - 50/125 µm (OM2 Fiber) existing applications to achieve a consistent - 50/125 µm laser optimized 10G (OM3 Fiber) appearance. RapidNet Fiber utilizes the LC connector - Single Mode with a 12 fiber single unit plenum (OFNP) cable, or utilizes the SC connector with a 6 fiber single unit Product Features plenum (OFNP) cable. Cut to the customer-specified - Exceeds ANSI/TIA-568-C and IEEE 802.3ae 10GbE standards length at HellermannTyton, each 12 fiber or 6 fiber - Modular panel accepts 4 RapidNet cassettes, allowing up to link is supplied terminated at both ends to RapidNet 48 fibers in 1U cassettes. Each pre-labeled 12 fiber or 6 fiber cassette - Certification test reports included with all fiber links snaps easily into the modular panel. Removal of - Cassette to connector option is provided with pulling eye pre- cassette is just as easy - simply slide the latch forward and the cassette slides out of the rear of the panel. installed on connector end - Standard part number is wired straight through (A-A). To order crossover (A-B), add "REV" to end of part number LC Connector Cassette to Cassette (panel to panel) Product Selection Part No. Description Cable Type Color RNF62PXXX* RapidNet 62.5/125µm (OM1) MM LC assembly 12 fiber Orange RNF50PXXX* RapidNet 50/125µm (OM2) MM LC assembly 12 fiber Orange RNF50P10GXXX* RapidNet 50/125µm (OM3) MM 10 Gig LC assembly 12 fiber Aqua RNFSMPXXX* RapidNet 8.3/125µm SM LC assembly 12 fiber Yellow *Note: To complete Part No., replace the "X's" with the length required in feet. Additional Information: Standard part number is wired straight through (A-A). To order crossover (A-B), add "REV" to end of part number. Example: RNFSMPXXXREV Cassette to Connector (panel to enclosure) Product Selection Part No. Description Cable Type RNFAAAXXXLC* RapidNet LC cassette to 12 LC connectors 12 fiber RNFAAAXXXSC* RapidNet SC cassette to 6 SC connectors 6 fiber *Note: To complete Part No., replace the "A's" with the appropriate fiber type: 62P, 50P, 50P10G, or SMP. Replace the "X's" with the length required in feet. 28 For product information visit www.hellermann.tyton.com or call 800.537.1512