General Cable Fiber Optics Catalog
Issue link: http://www.e-digitaleditions.com/i/181380
Fiber Optic Outside Plant Cables Loose Tube Single Jacket Armored Self-Supporting (Figure-8) Cable Product Construction: Fiber: • –216 fibers 2 • oose tube gel-filled L • olor-coding per TIA/EIA 598 B C Central Strength Member: • poxy/glass rod E CATALOG NUMBER XX0023M1N-DWB XX0044M1N-DWB XX0064M1N-DWB XX0084M1N-DWB XX0124M1N-DWB XX0184M1N-DWB XX0244M1N-DWB XX0364M1N-DWB XX0484M1N-DWB XX0604M1N-DWB XX0724M1N-DWB XX0964M1N-DWB XX1204M1N-DWB XX1444M1N-DWB XX1924M1N-DWB XX2164M1N-DWB NOMINAL CABLE DIAMETER X CABLE HEIGHT IN mm NO. OF FIBER LOOSE NO. OF COUNT TUBES FILLERS 2 4 6 8 12 18 24 36 48 60 72 96 120 144 192 216 2 1 1 1 1 2 2 3 4 5 6 8 10 12 16 18 3 4 4 4 4 3 3 2 1 0 0 0 2 0 2 0 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.469 x 0.929 11.9 x 23.6 0.535 x 0.996 13.6 x 25.3 0.602 x 1.063 15.3 x 27.0 0.752 x 1.213 19.1 x 30.8 0.752 x 1.213 19.1 x 30.8 0.764 x 1.228 19.4 x 31.2 0.764 x 1.228 19.4 x 31.2 MAXIMUM TENSILE LOAD WITHOUT MESSENGER NOMINAL CABLE SUB-UNIT CABLE WEIGHT LBS/1000' kg/km LBS N LBS N 237 237 237 237 237 237 237 237 237 237 255 275 339 339 335 335 352 352 352 352 352 352 352 352 352 352 379 409 498 498 505 505 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 2700 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 180 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 XX denotes glass type. A complete listing of NextGen® Brand glass types is specified on page 3 of this catalog. Typical Cross-Section Installation Notes: Messenger Wire Jacket Web Outer Jacket Corrugated Steel Armor The Maximum Tensile Load in the data table refers to the cable core only. Users should base sag and tension calculations on 1/4" EHS messenger per local guidelines and practices. Additional data is available upon request. Water Blocking Tape Gel-Filled Buffer Tube Central Strength Member Filler 48 Fiber Armor: • orrugated coated steel tape C Outer Jacket: • lack UV- and moisture-resistant B polyethylene (PE) • equential footage markings* S Messenger Wire: • /4" stranded EHS galvanized steel 1 • RCL with messenger** = 14,923 N/ M 3,350 kF Features: • oose tube gel-filled construction for L superior fiber protection • V- and moisture-resistant design U • elf-supporting figure-8 design S Performance: • emperature: T Storage -40˚C (-40˚F) to +75˚C (+167˚F) Installation -30˚C (-22˚F) to +60˚C (+140˚F) Operating -40˚C (-40˚F) to +70˚C (+158˚F) • inimum Bend Radius: M 20 X OD—Installation 10 X OD—In-Service • aximum Crush Resistance: M Short - 125 lbs/in (220 N/cm) Long - 63 lbs/in (110 N/cm) Applications: • nterbuilding voice or data I communication backbones • nstalled aerially I Compliances: • ested in accordance with EIA/TIA-455 T FOTPs • CEA S-87-640 I • R-20 G • oHS Compliant Directive 2002/95/EC R Options: • lternate 6-fiber per tube available upon A request Ripcord Hybrid designs (containing singlemode and multimode fiber) and composite designs (containing copper conductors) are also available. For complete listing of all fiber counts offered, please contact your General Cable sales representative. Ordering Part Number Example AQ0244M1N-DWB * equential meter markings available S upon request **nstallation load should be lower than I maximum rated cable load to allow for wind and ice loading in accordance with NESC guidelines. Singlemode, 24 fibers, loose tube SJ armored (figure 8) Please see pages 4 and 5 for a complete guide on part number selection and ordering information. EIA/TIA 455 13