General Cable Fiber Optics Catalog
Issue link: http://www.e-digitaleditions.com/i/181380
Fiber Optic Interconnect Cables Tight Buffer 3.0 mm Simplex/Duplex Riser and Plenum Cable Type OFNR, CSA FT4 and Type OFNP, CSA FT6 Product Construction: Fiber: •1 or 2 fibers •900 µm tight buffer Overall Strength Member: •Aramid fiber yarn MAXIMUM TENSILE LOAD NO. OF NOMINAL CABLE NOMINAL CABLE INSTALLATION IN-SERVICE DIAMETER WEIGHT FIBER SUBCOUNT UNITS IN mm LBS/1000' kg/km LBS N LBS N CATALOG NUMBER Riser XX0011SNR3.0 XX0021ZNR3.0 1 2 — — 0.114 x 0.247 2.9 x 6.0 Plenum XX0011SNU3.0 XX0021ZNU3.0 1 2 — — 0.114 x 0.247 2.9 x 6.0 0.118 0.118 3.0 3.0 5.5 10.5 8.2 15.6 110 220 490 980 65 160 290 580 6.5 12.1 9.7 18.0 110 220 490 980 65 160 290 580 XX denotes glass type. A complete listing of NextGen® Brand glass types is specified on page 3 of this catalog. Jacket: •3.0 mm unit diameters •Flame-retardant compound •Sequential footage markings* • range jacket—multimode fibers O (except 10 Gbps) •Aqua jacket—10 Gbps multimode fibers •Yellow jacket—singlemode fibers Features: •Industry-standard design •deal for interconnect and Fiber-To-TheI Desk (FTTD) Performance: Typical Cross-Section • emperature: T Storage -40˚C (-40˚F) to +70˚C (+158˚F) Installation 0˚C (+32˚F) to +50˚C (+122˚F) Operating -20˚C (-4˚F) to +70˚C (+158˚F) • inimum Bend Radius: M 20 X OD—Installation 10 X OD—In-Service • aximum Crush Resistance: M 500 lbs/in (875 N/cm) Flame-Retardant Jacket Overall Strength Member 900 µm Tight Buffer Fiber Applications: Simplex Flame-Retardant Jacket Overall Strength Member 900 µm Tight Buffer Fiber Duplex Zipcord •nterconnect design compatible with I connectors requiring 3.0 mm jacket diameter •Fiber-To-The-Desk (FTTD) • TL Listed Type OFNR for installation E in vertical riser and general horizontal applications when installed in accordance with NEC article 770.154 and 770.179 • TL Listed Type OFNP for installation E in ducts, plenums and other spaces used as environmental air returns when installed in accordance with NEC article 770.154 and 770.179 Compliances: Hybrid designs (containing singlemode and multimode fiber) and composite designs (containing copper conductors) are also available. Ordering Part Number Example BE0011SNU3.0 or BE0021ZNU3.0 50 µm multimode, one or two fibers Please see pages 4 and 5 for a complete guide on part number selection and ordering information. •ETL Listed Type OFNR/OFNP •CSA FT4, CSA FT6 •TIA 568 C.3 •GR-409 • oHS Compliant Directive 2002/95/EC R * equential meter markings available S upon request TIA 568 C.3 39