Issue link: http://www.e-digitaleditions.com/i/206043
ADVANTAGES: Hitachi Perfect Coat Plus™ chains utilize a unique dual coating, mechanical rust prevention system, consisting of a zinc alloy blast and a non-aqueous di-chromate sealing solution. This coating is ideally suited for mildly corrosive, moisture related applications such as wash down lines on conveyors, outdoor service or other similar uses. compared with nickel plating. ratings are the same as carbon steel chains. As with all platings including nickel, zinc or cadmium, Perfect Coat Plus™ is NOT FDA approved for direct contact with food products. It can however be used in the food and beverage industry where the chain does not directly contact food products, but where resistance to rust is required. embrittlement is eliminated. stainless steel. ASME/ANSI Roller Chains Double Pitch Roller Chains Double Pitch Roller Chains CHAIN DIMENSIONS ARE GIVEN IN INCHES Hitachi Roller Chain Number Pin Link Plate Link Plate Riv. Pin Roller Diameter Diameter Thickness Height Length Lr H T D R Rated Average Average Cot. Pin Working Ultimate Chain Length Load Strength Weight Lc (Lbs/Ft) (Lbs) (Lbs) Chain Pitch P Inside Width W 35PCP 3/8 0.188 0.200 0.141 0.050 0.354 0.236 0.272 480 2,400 0.23 40PCP 1/2 0.312 0.312 0.156 0.060 0.463 0.327 0.378 810 4,300 0.40 50PCP 5/8 0.375 0.400 0.200 0.080 0.577 0.402 0.465 1,400 7,200 0.66 60PCP 3/4 0.500 0.469 0.234 0.094 0.691 0.504 0.555 1,950 9,900 0.98 80PCP 1 0.625 0.625 0.312 0.125 0.921 0.646 0.732 3,300 17,600 1.69 100PCP 1 1/4 0.750 0.750 0.375 0.156 1.154 0.776 0.917 5,060 26,400 2.62 120PCP 1 1/2 1.000 0.875 0.437 0.187 1.382 0.976 1.126 6,800 39,000 3.86 C2040PCP 1 0.312 0.312 0.156 0.060 0.450 0.323 0.406 600 4,300 0.32 C2050PCP 1 1/4 0.375 0.400 0.200 0.080 0.591 0.402 0.465 1,000 7,200 0.55 C2060HPCP 1 1/2 0.500 0.469 0.234 0.125 0.670 0.567 0.654 2,000 12,300 0.93 C2080HPCP 2 0.625 0.625 0.312 0.156 0.890 0.701 0.827 3,400 20,200 1.56 C2042PCP 1 0.312 0.625 0.156 0.060 0.450 0.323 0.406 600 4,300 0.55 C2052PCP 1 1/4 0.375 0.750 0.200 0.080 0.591 0.402 0.465 1,000 7,200 0.85 C2062HPCP 1 1/2 0.500 0.875 0.234 0.125 0.670 0.567 0.654 2,000 12,300 1.40 C2082HPCP 2 0.625 1.125 0.312 0.156 0.890 0.701 0.827 3,4000 20,200 2.25