Issue link: http://www.e-digitaleditions.com/i/206043
Extra Capacity Chains E-Series (Through Hardened Pin) High Strength Roller Chains E-Series roller chains possess alloy steel through hardened pins to signi cantly improve shock load resistance and ultimate strength. These chains are best used on heavy construction or mining equipment, when superior toughness is required. E-Series roller chains operate over standard ASME/ANSI sprockets (hardened teeth recommended). E-Series High Strength Roller Chain Speci cations Dime nsions (Inche s) Chain Pitch Inside Width P W R 60E 3/4 0.500 80E 1 0.625 100E 1 1/4 120E 140E Chain Numbe r Rolle r Pin Link Plate Diame te r Diame te r Thickne ss R/L Plate He ight Lc Tp (lbs) Ave rage Chain We ight (lbs) (lbs/ft) D T 0.469 0.234 0.094 0.691 0.504 0.555 - 2,470 10,300 0.98 0.625 0.312 0.125 0.921 0.646 0.732 - 4,140 17,850 1.69 0.750 0.750 0.375 0.156 1.154 0.776 0.917 - 6,360 26,750 2.62 1 1/2 1.000 0.875 0.437 0.187 1.382 0.976 1.126 - 8,540 39,100 3.87 1 3/4 1.000 1.000 0.500 0.219 1.610 1.063 1.232 - 11,310 51,000 4.98 160E 2 1.250 1.125 0.562 0.250 1.839 1.268 1.437 - 14,900 66,100 6.58 2 1/4 1.406 1.406 0.687 0.281 2.067 1.429 1.657 - 16,600 81,600 9.00 200E 2 1/2 1.500 1.562 0.781 0.312 2.354 1.547 1.878 - 18,600 105,650 11.38 240E 3 1.875 1.875 0.937 0.375 2.768 1.898 2.201 - 25,400 152,000 15.89 60E-2 3/4 0.500 0.469 0.234 0.094 0.691 0.945 1.012 1.028 0.898 4,100 20,600 1.98 80E-2 1 0.625 0.625 0.312 0.125 0.921 1.213 1.327 1.283 1.153 6,380 35,700 3.43 100E-2 Double Strand Chains Lr Ave rage Ultimate Stre ngth 180E Single Strand Chains H C/L Chain C/L Chain Rate d Transve rse to Riv. Pin to Cot. Pin Working Pitch End End Load 1 1/4 0.750 0.750 0.375 0.156 1.154 1.480 1.622 1.539 1.409 10,130 53,500 5.19 120E-2 1 1/2 1.000 0.875 0.437 0.187 1.382 1.870 2.020 1.925 1.787 13,110 78,200 7.77 140E-2 1 3/4 1.000 1.000 0.500 0.219 1.610 2.028 2.193 1.925 2.055 17,170 102,000 9.83 22,440 132,200 13.07 27,370 163,200 17.89 160E-2 1.125 0.562 0.250 1.839 2.417 2.591 2 1/4 1.406 1.406 0.687 0.281 2.067 2.720 2.949 2.590 2.700 200E-2 2 1/2 1.500 1.562 0.781 0.312 2.354 2.957 3.291 2.819 3.083 31,110 211,300 22.67 240E-2 3 1.875 1.875 0.937 0.375 2.768 3.626 3.925 3.457 3.457 40,120 304,000 31.67 60E-3 3/4 0.500 0.469 0.234 0.094 0.691 1.386 1.472 1.028 0.898 6,180 30,900 2.98 80E-3 1 0.625 0.625 0.312 0.125 0.921 1.791 1.913 1.283 1.153 10,350 53,550 5.16 100E-3 1 1/4 0.750 0.750 0.375 0.156 1.154 2.185 2.327 1.539 1.409 15,900 80,250 7.77 120E-3 1 1/2 1.000 0.875 0.437 0.187 1.382 2.764 2.913 1.925 1.787 21,350 117,300 11.56 140E-3 1 3/4 1.000 1.000 0.500 0.219 1.610 2.988 3.165 2.055 1.925 28,280 153,000 14.72 160E-3 2 1.250 1.125 0.562 0.250 1.839 3.571 3.740 2.437 2.303 37,250 198,300 19.60 180E-3 2 1/4 1.406 1.406 0.687 0.281 2.067 4.028 4.248 2.700 2.590 41,500 244,800 26.78 200E-3 2 1/2 1.500 1.562 0.781 0.312 2.354 4.366 4.697 3.083 2.819 46,500 316,950 33.96 240E-3 46 1.250 180E-2 Triple Strand Chains 2 2.303 2.437 3 1.875 1.875 0.937 0.375 2.768 5.354 5.654 3.457 3.457 59,000 456,000 47.45