Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 36 of 105

29 Case Studies & Best Practices of roadside infrastructure with brand-new curbs, gutters, and sidewalks. 31 When construction com- menced, two lanes of traffic were maintained in each direction, with the work zone delineated by orange traffic barrels. Within a short time, it became apparent that this traffic control plan was not working. It created a narrow, unprotected construction area, with work crews exposed to moving vehicles and confused drivers occasionally entering the work zone. 31 To address these concerns, a new traffic control plan was devised utilizing a reversible lane with moveable barriers. Using more than a mile of moveable barriers – which can be used to quickly reconfigure the lanes to reverse travel direction – the plan called for a reduction of open lanes from four to three, with two being dedicated to whichever direction was experiencing peak volume. This provided an expanded work zone along with positive physical protection of the highway crews. 32 Results Once the new traffic control plan with moveable barriers was implemented, zero additional vehicle incursions into the work zone occurred for the remainder of the project. In addition, left-turn and head-on crashes – two particularly severe types of collisions – were greatly reduced because the barriers physically prevented mid-block turns. This marked a great improvement over the first phase of the project, when the work zone was delineated with traffic barrels and confused motorists made left turns through the work zone despite signage prohibiting such maneuvers. A project report commissioned by the Utah DOT and compiled by T.Y. Lin International, estimated that utilizing this innovative approach, the movable barriers prevented 20-25 left-turn crashes, saving approximately 1 million dollars (assuming none of the crashes was fatal) and reducing the crash- related congestion seen earlier. 32 In addition to the safety benefits, the expanded and protected work zone allowed crews to operate significantly more efficiently and use larger, more effective machinery. This resulted in substantial economic benefits, as the contractor was able to condense the original three-phase plan into two phases, and complete the entire project seven months early. 32 The project evaluation report estimated that using movable barriers yielded a benefit/cost ratio of between 4:1 and 10:1, based on crash, travel time, and emission reductions, benefits to local businesses, and reduced vehicle operating costs. 32 In addition to these safety and economic achievements, this project marked the first use of movable barriers on a major U.S. arterial project, as opposed to on a freeway or bridge. 32 Intersections Intersections constitute a very small physical part of the road network, yet they are implicated in roughly 20 percent of all traffic fatalities and 40 percent of motor vehicle crashes. 33 Not only must motorists negoti- ate a variety of potential conflict points with other vehicles, they need to watch for crossing pedestrians, changing signals, lane assignments, and street signs. Given intersection complexities, perhaps it is not surprising that many of the FHWA-recommended countermeasures deal directly with this topic. One that has traffic safety experts particularly excited – modern roundabouts – was relatively slow to get off the ground in the United States when compared with their Utilizing this innovative approach, the movable barriers prevented 20-25 left-turn crashes, saving approximately 1 million dollars.

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide