Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 14 of 105

7 A Primer on Roadway Safety Interstates are built to the highest standards, and feature wide travel lanes, divided medians, crash barriers and other lifesaving treatments. In contrast, rural roads are often twisting, with high speeds, blind curves, narrow shoulders, and abundant roadside hazards. If you make a mistake on an Interstate and depart the roadway, chances are a safety barrier will protect you. The same mistake on a rural highway will likely send you into a tree, ditch, or utility pole. There is no such thing (yet) as a risk-free road, but those that are engineered to predict driver error and protect against it boast the lowest fatality rates. This is one of the underlying ideas behind the Safe System approach, and highlights the importance of roadway safety efforts in all communities. Seven Principal Safety Concerns Despite carrying 25 percent of the nation's traffic, the Interstate system only makes up one percent of the highway mileage in the country. 13 This means all of us are likely to spend a good deal of time on riskier roads lacking the advanced safety features that are proven to save lives. Here, we discuss seven roadway concerns that safety experts agree are potentially dangerous, regardless of location. These are particularly noteworthy because they are underlying, systemic conditions that exacerbate the risk of other important crash factors, such as excessive speed, driver error, and bad weather. Remember to consider these concerns as you fill out the following checklist in step 2 and describe your trouble spot or hazardous operating condition. Does it relate to one or more of the seven roadway concerns described below? Circle those that are most applicable to your situation. 1. Roadway departure hazards: Vehicles leaving the roadway, regardless of cause, account for approximately 15,000-20,000 deaths per year, with 53 percent of fatal crashes involving a roadway departure. 14 These crashes, which can happen on straight or curved sections of roadway, occur when a vehicle leaves its travel lane and crosses a centerline or edge line (at a non- intersection location). Roadway departure is therefore an umbrella category that encompasses crossover crashes and run-off-the-road crashes, both of which tend to be severe and often involve vehicle rollover or collisions with fixed objects such as trees and utility poles. 14 Other roadside hazards include steep side slopes, drainage ditches along the roadway, and narrow shoulders not large enough to accommodate an errant or disabled vehicle. 2. Road surface conditions: Even well-engineered, well-constructed roadways can become treacherous when blanketed with snow, or when poorly maintained. Aberrations in the road surface – such as pavement edge drop-offs, potholes, and reductions in surface friction due to age, wear, poor drainage, and inadequate ice or snow removal – impair vehicle control, often leading to preventable crashes. Rural roads are often twisting, with high speeds, blind curves, narrow shoulders, and abundant roadside hazards.

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide