Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 63 of 105

56 w w w . r o a d w a y s a f e t y . o r g are often appropriate in urban locations, while wide shoulders may be more feasible in rural areas, and shared use paths may work in suburban communities. Regardless of what form the "walkway" takes, the underlying idea is separation, whether by space or physical barrier. According to FHWA, having sidewalks on both sides of the roadway has been shown to reduce "walking along road" pedestrian crashes by 88 percent. 52 A 71 percent reduction in these crashes has been demonstrated with paved and widened shoul- ders. 52 In short, where resources and space permit – and demand justifies – these paths for nonmotorized users may be extremely beneficial in your community. Bridging the Motor-Foot Divide (Almost) There is a certain tension between motorized and nonmotorized road users. It may not be present in all communities at all times, and allegiances may be inconsistent. How many drivers, for example, declare that they, "can't stand bicyclists," then get on a bike and complain that passing cars don't give them enough space? Motorists accuse bicyclists of flouting traffic laws; bicyclists counter that motorists don't respect their status as vehicles. Such discord, and corresponding bad behavior on the road, has resulted in pleas to respect all users' rights and "share the road." This puts community leaders, elected officials, concerned citizens, and transportation professionals in a tough position. How do you weigh the needs of different kinds of road users? What is the appropriate balance between efficiency and safety? BOX 3.11: IMPROVED DRIVER COMPLIANCE AT CROSSWALKS Signs, signals, and pavement markings all play a critical role in managing and regulating traffic flow, but major safety concerns arise when road users don't comply with the direc - tions provided. In St. Petersburg, Florida, for example, the pedes- trian crash rate once stood at 68.9 per 100,000 population, compared to the national figure of 23.4. With roughly 100 uncontrolled crosswalks in the city and a review concluding that motorist yielding compliance rates were less than two percent overall, the city recognized that significant improvements needed to be made. Toward this end, devices known as Rectangular Rapid Flashing Beacons were installed at 19 crosswalks where over 98 percent of motorists failed to yield. These LED Rectangular Rapid Flashing Beacons are placed immediately beneath pedestrian crossing signs and feature quick, irregular flash - ing patterns designed to grab the attention of approaching motorists. Results of the installation were dramatic, with compliance rates reaching 94 percent at some crosswalks and averaging about 82 percent system-wide. Drivers also yielded farther in advance of the crosswalks, providing a safer zone for pedestrians and reducing the likelihood of rear-end crashes. Another type of beacon, known as the Pedestrian Hybrid Beacon, has also been very effective in improving motorist compliance and pedestrian safety. These beacons consist of special synchro - nized traffic signals and pedestrian countdown timers that are installed at crosswalks not otherwise controlled by a traditional stoplight (at a mid-block location, for example). In addition to improving safety, these beacons are also designed to improve efficiency, as they sit dormant until a pedestrian activates them. Sources: City of St. Petersburg, FL; Center for Education and Research in Safety; Federal Highway Administration

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide