Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.
Issue link: http://www.e-digitaleditions.com/i/418038
59 • Cyclists are allowed to – and will – operate on most types of roads. • When there is a heavy presence of cyclists, especially in urban environments, bike lanes improve operation and comfort for all road users, when compared with other options. • By reducing the tendency for motorists to encroach when passing a cyclist, bike lanes allow all traffic to operate freely, thereby mitigating the kinds of back-ups encountered when long lines of traffic get stuck behind bicyclists. However, this should not be taken to mean that bike lanes are appropriate on all roadways. Roads that are already narrow and unable to accommodate a bike lane without eliminating general purpose lanes that serve as popular truck or commuter routes, or that have certain arrange - ments for on-street parking – such as head-in angled spaces 59 – may simply be inappropriate for such retrofitting, and may increase tension between motorists and bicyclists. In cases like this, incorporating bike lanes on alternate routes may help create safer and more convenient networks for bicyclists. Safety for Vulnerable Road Users BOX 3.13: EXPLANATION OF BIKE ROUTE MAP The diagram on the previous page shows a very simplified road system, in which roads A, B, C, D, E, and F serve a residential development, a school, an Interstate highway, and a larger suburban community. In this example, the dotted gray line shows the route that community leaders want bicyclists to take from the residential area to the school during morning rush hour. Here's why: • Road A: Road A is an Interstate highway. In this example, legally, no cyclists are permitted to operate on this road. It cannot be included in the bike route. However, Road A is an important factor in our scenario: commuters are trying to get to Road A on their way to work. • Road B: This is the major arterial serving the Interstate. Bikes are permitted on this road, but it is not ideal for their use. Motor vehicle congestion is heavy because of commuter traffic, and the presence of bikes adds to this slowdown while also posing an elevated hazard to the cyclists. It is necessary for bikes to use Road B when first leaving the residential development, and this is both legal and appropriate. The goal, however, is to get them off of Road B as soon as possible. • Road C: For bikes to use Road C poses two problems. First, it keeps them on the heavily-congested and relatively-risky Road B a block longer; second, Road C has angled on-street parking, which is particularly hazard - ous for bicyclists. Use of Road C should be discouraged. • Road D: This is a better option for cyclists wishing to travel East in the morning, but it is too narrow to accommodate a dedicated bike lane. Studies show that sharrows (see photo) can help regulate traffic in shared lanes, so putting these markings along Road D may improve safety and encourage cyclists to choose this route. • Road E: Road E is ideal for a bike lane – it doesn't connect to the Interstate, so morning traffic is lighter than on Road B. Additionally, it is wide enough to accommodate a slight reduction in lane width for the purpose of adding a bike lane, and it runs a similar North-South route that allows travelers to get from the residential development to the school, via Road F. While this is obviously a very simple example, you can see here how safety and efficiency may be able to be improved for both motorists and cyclists through targeted use of bike lanes, sharrows, and other infrastructure modifications. The needs of commuters have been met by drawing cyclists off of Road B as soon as possible, and cyclists have been provided a safe, efficient route to their destination. www.pedbikeimages.org / Lyubov Zuyeva

