Issue link: http://www.e-digitaleditions.com/i/571156
water uptake but no disintegration, while Type III disintegrated in discrete steps, i.e., tablet pieces. Type IV disin- tegrated only partially. FCC exhibited a Type I disintegration pattern, and its residence time was half that of the market formulation used as a refer- ence. Furthermore, granules produced pression pressures, which allowed the porosity to remain higher than 50 per- cent." That provides a large volume of voids to accommodate APIs. Furthermore, the authors proposed that the interlocking of the external lamellae—what they called Type I bonds (Figure 3a) —provided a large number of contact points on the sur- face that lead to greater tensile strengths at lower compression pres- sures than those of other excipients. At higher compression pressures, the FCC particles deform by fragmenta- tion, yielding new contact points that the authors dubbed Type II bonds (Figure 3b). Finally, the FCC tablets' combination of high tensile strength and high porosity—two desirable but inversely proportional parameters— indicated that FCC could be used in orally disintegrating tablets (ODTs). Use in ODTs In fact, one of the first applications of FCC as a pharmaceutical excipient came from Stirnimann et alia, who developed an ODT using it [4]. In order to measure residence time, the authors used a tensiometer in a way that enabled them to measure mass versus time, which in turn allowed them to study water uptake and disin- tegration kinetics. The authors studied the disintegration kinetics of 24 differ- ent formulations and identified four different disintegration patterns (Figure 4). Type I was considered the ideal behavior because it resembled the market formulation, i.e., a gain of mass due to water uptake followed by a loss of mass due to disintegration. Type II was characterized by very fast by dry granulation using a mixture of FCC and 3 percent (w/w) disintegrant (croscarmellose sodium) disintegrated in 2 seconds (Figure 5a), while ODTs manufactured with the same granules and 10 percent (w/w) caffeine disinte- grated in 10 seconds (Figure 5b) [5]. Conclusion FCC is a very promising new excip- ient that comprises two monographed minerals. It has high loading capabil- ity, and granules can be manufactured by dry granulation without using a binder. In addition, it can produce tablets of high mechanical strength at low compression pressures, preserving the internal porosity that can be used both for API allocation and fast disin- tegration. It is exciting to hypothesize what kind of formulations this material will make possible in the near future. FCC could revolutionize ODTs and Figure 3 Compression properties of FCC related to its structure [2] b. Type II bonds resulting from the deformation by fragmentation of the particles' core a. Type I bonds resulting from the interlocking of FCC parti- cles' external lamellae I I I II Figure 4 Types of disintegration kinetics found by testing different ODT formulation options: FCC versus a market formulation. The FCC ODTs disintegrated in half the time [3]. 0 20 40 60 0.8 0.6 0.4 0.2 0 Time (s) II: MCC and disintegrant I: FCC and disintegrant I: Market formulation IV: MCC-based fillers and disintegrant III: Lactose monohydrate and disintegrant Mass (g) FCC has a high loading capability. It can also produce tablets with high mechanical strength at low compression pressures while preserving internal porosity. Tablets & Capsules September 2015 47

