Euro Forgings

Master Catalog MC1

Issue link: http://www.e-digitaleditions.com/i/71845

Contents of this Issue

Navigation

Page 389 of 539

D&D TECHNOLOGIES GATE HARDWARE QUICK & EASY INSTALLATION Fits all materials… INSTALLATION REQUIREMENTS (Top Pull & Vertical Pull models) For swimming pool and other child safety gates, most Barrier Codes and Standards specify the following requirements: • The pool gate must open outward, away from the pool, so the latch must be installed to the outside of the gate • The latch release knob is to be mounted at least 54" or 60" (1370 or1500mm) above finished ground – or at a height specified by your local community Codes • The fence height should be a minimum 48" (1200mm) above finished ground – or at a height specified by your local barrier/fencing Codes Always confirm any such requirements with the appropriate local pool or safety authorities in your area, as regulations may vary from region to region. Always install the latch in accordance with local fence/barrier regulations. Adjusts in two directions! Adjustable striker offers horizontal adjustment of 1/2"–17/16" (13–37mm) and vertical adjustment of 11/2" (38mm) for the Top Pull model and 3/4" (19mm) for the Vertical Pull model. Lower mounting dovetail bracket with side-fixing leg for added strength. TOP PULL model To make a safety gate complete, add Tru•Close adjustable, self-closing gate hinges with a Hinge Safety Cap. The cap prevents toddlers from using the hinge top as a toehold. ADDITIONAL SAFETY Strong, stylish extrusion with sturdy screw-in fixing Quick-Slide (dovetail) mounting bracket PRODUCT Gate Frame (More details page 28) Fixing screws are hidden to prevent tampering while locked Fence Post SAFETY NOTE After installation, inform gate owners that it is their responsibility to inspect and adjust any gate latches and hinges to compensate for ground movement and other factors, so that the gate continues to self-close and self-latch effectively. 2" GATE GAP SPACER Applies to North America only… The Magna•Latch® For larger gaps of 11/2"–2", an optional spacer is available. Install the spacer behind the Striker Mounting Plate to ensure proper latch installation and operation. a gate gap variance of 3/8" to 17/16". PRODUCT 2" GATE GAP SPACER comes standard with Striker Mounting Plate Code: MLSPACER (Black only) VERTICAL Striker adjusts from the side to provide greater convenience. HORIZONTAL VERTICAL PULL MODEL 388 Tel. 905-265-1093 8 USA: (800) 716-0888 EUROPE: +31 (0)30 280 7050 Toll Free 1-800-465-7143 AUSTRALIA: 1800 500 203 Fax 905-265-1063 www.euroforgings.com www.ddtechglobal.com NEW NEW HINGES LOCK SETS HANDLES & PLATES LATCHES / BOLTS CLOSERS / TECHNOLOGIES D&D

Articles in this issue

view archives of Euro Forgings - Master Catalog MC1