Summer Classics Contract Catalog

SCC-2017-Catalog

Summer Classics Contract Catalog 2015

Issue link: http://www.e-digitaleditions.com/i/746043

Contents of this Issue

Navigation

Page 286 of 287

286 If you want to maintain or bring the natural golden color back you can add teak protector(PNT-00360) to maintain the natural color. In order to preserve the golden teak color it is important to apply the protector before the teak becomes gray since preventing the graying results in less work than restoring the teak with teak cleaner. Teak Protector last 4 times longer than applied teak oil and 2 times longer than applied teak sealer. Teak Protector should be used when the teak furniture starts to grey. Clean the product using the teak cleaning instructions. Make sure the area is completely dry after cleaning before applying the teak protector. Once dry apply a very thin layer over the cleaned area with a dust free cloth. Wait 30 minutes and apply a second thin layer. If you apply too much in one application a slight color variation may occur. Protector application is fast and easy to apply and is 100% water based. It is not oil or greasy. Clothes and cushions will stay clean. Teak protector is resistant to mold and prevents black spots on teak. It actually penetrates into the pores of the teak and contains unique UV inhibitors and reflectors. In less than an hour and almost becomes invisible. Unlike oil application, Teak Protection, once allowed to dry a few hours, will not damage clothing. You must allow the teak protector to fully dry before use. If you use products before the teak protector is dry completely, cloths or cushions can be stained. This should be applied at least once a year. Teak shield(PNT-00361) is a third product that can be applied to outdoor teak the teak shield will prevent food stains (coffee, red wine, olive oil, ketchup, etc.) from penetrating into teak. It will produce a transparent protective layer on the wood but not penetrate the wood like the protector. It rejects moisture and dirt and helps prevent and reduce mold and mildew growth. New Product: Allow new products to weather outside for two weeks before applying the teak shield and or clean with Teak Cleaner. A degree of natural oil in the product is needed to be reduced before application. First clean with teak cleaner(PNT-00359). Make sure the wood is then 100% dry and free from dust. If cleaned wood feels rough in some areas sand lightly and clean thoroughly before treating with Teak Shield. Now apply a thin layer of shield with a clean soft cloth and allow drying for 4 hours. After 4 hours a second thin layer should be applied. Wait 48 hours before exposing to moisture. To maintain the natural golden color, Teak protector should be applied several times a year. Table tops will need regular applications. • Teak will age overtime and will need to be cleaned and treated annually. If you refinish first follow the Teak Cleaner steps, the teak cleaner will remove Teak Shield. After the wood dries, it can be lightly sanded if needed. • Placing Teak Shield over Teak Protector will help repel water penetration but only for a short time since the Shield cannot soak into fully into the wood. • Do not place Teak Protector over Teak Shield as Shield will not allow Protector to perform penetration. How to use Maintains the original, honey brown color of Natural Teak for a longer time. Easy to Apply. Protector TEAK How to use Makes Teak and other hardwoods repellent to water and moisture. Helps to prevent stains caused by food and drinks. Easy to Apply. Shield TEAK

Articles in this issue

Archives of this issue

view archives of Summer Classics Contract Catalog - SCC-2017-Catalog