Issue link: http://www.e-digitaleditions.com/i/938031
www.hellermann.tyton.com 800.537.1512 Blind Hole Mount Cable Ties For Threaded and Nonthreaded Holes HellermannTyton Blind Hole Mount Cable Ties for threaded and nonthreaded holes offer an easy-to-use method for bundling and affixing cables. The two-piece design includes a heat stabilized cable tie and formula-matched, 1/4" mount that features a low insertion force and aggressively resists pull off. Performs equally well in threaded or nonthreaded blind holes. Mount can slide along cable tie to adjust orientation if needed. Fastener can be removed from hole using a hex driver. This ensures fastener can be reused. Features and Benefits • Delivers high extraction force for reliable performance, yet it's easy to install. • Reusable fastener can be removed from threaded or nonthreaded holes using a 5/16" hex driver. • Heat stabilized material provides excellent resistance to high temperatures. A "blind hole" goes to a specific depth without continuing through the opposite end. It prevents a screw or other fastener from poking through and potentially damaging other components. Turning screws and adding extra hardware can be time consuming. Blind Hole Mount Cable Ties accelerate and simplify the mounting process. No tools needed – simply press for an instant, secure attachment. MATERIAL Polyamide 6.6 heat stabilized (PA66HS) Operating Temperature -40°F to +257°F (-40°C to +125°C) Flammability UL 94 V2 Color Black PART NO. Type Diameter (D) Fixing Hole Depth Min. Bundle (Ø) Max. Bundle (Ø) Min. Length (L) Tensile Strength Min. Pkg Qty in. mm in. mm in. mm in. mm in. mm lbs. N 156-01807 T50SOSBHMB 0.25 (6.0) 0.5 (12.7) 1.40 (35.0) 0.10 (2.5) 6.0 (150.0) 50 225.0 500 156-01796 T50ROSBHMB 0.25 (6.0) 0.5 (12.7) 1.97 (50.0) 0.10 (2.5) 8.0 (200.0) 50 225.0 500 156-01726 T50RBHMB 0.25 (6.0) 0.5 (12.7) 1.97 (50.0) 0.10 (2.5) 8.0 (200.0) 50 225.0 500 Use Type for ordering and specification purposes. Bundling & Securing Blind Hole Mount Outside Serrated Inside Serrated Instructions for Use 1. Press mount into blind hole. 2. To remove mount from blind hole: a. Offset hex-head mount: Use a 5/16" hex driver to unscrew mount from threaded or nonthreaded blind hole, leaving cable tie intact if desired. b. Standard hex-head mount: Cut cable tie and use a 5/16" hex driver to unscrew mount from threaded or nonthreaded blind hole. c. All-plastic mount: Cut cable tie and rotate mount out of threaded blind hole. Offset Version Shown Offset Version Shown L D