Machinery Lubrication magazine published by Noria Corporation
Issue link: https://www.e-digitaleditions.com/i/1103301
PUMP CONDITION MONITORING DEVICE Allweiler's new IN-1000 condition monitoring device is designed to monitor pumps in operationally critical and environmentally sensitive applications. It incor- porates one master and up to 10 satellite modules per network to enable operators to check as many as 11 pumps at once. Built-in features include a two-level warning and alarm system, logging of sensor data, and remote monitoring with a smartphone app. Operators can assess expected performance versus actual performance on key indicators such as leak detection, bearing temperature, vibration, suction and discharge pressure. Allweiler www.circorpt.com 877-853-7867 CORDLESS GREASE GUN e new Lumax RoboLuber (LX-1182) is a heavy-duty, cord- less grease gun with a patented configuration to speed up lubrication tasks. It has a maximum operating pressure of 10,000 pounds per square inch with a high flow rate of up to 7 ounces at normal pressures and 2.8 ounces at high pressures. e 20-volt lithium-ion battery can deliver more than six cartridges of grease. e grease gun also comes with a two-speed switch for high-pressure or high-volume delivery and an integrated LED light to help locate hidden grease points. Lumax www.lumax.com 844-660-6876 METALWORKING FLUIDS The new Metworx line of metalworking f luids from Petro-Canada is intended to help reduce friction over a wide range of operations. The f luids are available in a variety of options for both general-pur- pose and specific applications such as milling, turning, drilling, tapping and grinding. The Neatcut HD 32 CF is a medium-viscosity, neat cutting f luid, while the Solcut HD 2500 CF is a soluble cutting oil for rapid heat removal. The Syncut 300 HD XL and 150 LD XL are low-foam, bio-stable, semi-synthetic f luids. Rounding out the line is the Syncut 99 FS, which is a light-duty, low-foam, bio-stable synthetic f luid. Petro-Canada lubricants.petro-canada.com 866-335-3369 5 6 8 SYNTHETIC MOTOR OIL RelaDyne's new DuraMAX Full Synthetic XLT is formulated to meet the performance requirements of gasoline direct injection (GDI) and turbocharged gasoline direct injec- tion (TGDI) engines. Featuring extreme engine temperature performance and wear protection, the premium motor oil is specially designed to surpass today's engine requirements and provide addi- tional protection for engines when the original equipment manu- facturer (OEM) drain interval is exceeded. e motor oil also incorporates advanced additives to help prevent deposits and sludge and keep engines clean. RelaDyne www.RelaDyne.com 888-830-3156 7 ML 5 6 7 www . machinerylubrication.com | March - April 2019 | 31 8