Issue link: https://www.e-digitaleditions.com/i/1184256
length be 40mm in diameter, and upper stages can be no smaller that 18mm in di- ameter. To be competitive, models need to be flown with two stages, with the motors for the stages separated by 10" or more. Using electronic altimeters to determine altitude, the highest altitude on a single flight wins. For the meet, everyone flew A10-0T boosters and 1/2A3-4T sustainers. In S1B, two of the top spots were tak- en by the father-daughter combination of Emma and Steve Kristal. They knew go- ing in that our prior strength had always been our pistoning, but that was out due to rule changes this year. So they spent a lot of time redesigning and test flying our models. They borrowed what they thought were the best features of the Kreutz mod- els, which Emma flew very successfully in Poland last year. Then they added in some features of the VanMilligan models, ultra- thin and novel design fins. But the ma- jor improvement to the models had to do with new construction materials. Emma and Steve have never been very skilled at manufacturing ultra-light fiberglass tubes, so they used paper. This year experiments with some 20 different types and weights of paper resulted in waterproof boosters that weighed half of their previous models. But a major design credit also goes to Ju- nior teammate Trevor Harrison who Steve flies with in his local club. Trevor bril- liantly out-of-the-boxed a concept of using vellum for the internal 10-inch long gap- stage tube. Sometimes when you are not experienced enough to know that some things obviously won't work, you try them anyway...and they work! It was that spark from Trevor that was the final piece of the puzzle that helped put Emma and Steve on the team. The third spot was captured by Allison Van Milligan. This was the first time two spots on the Senior team were captured by two former members of the Junior U.S. team. S2P Precision Payload S2P is the FAI version of the Team America Rocketry Challenge event. Contestants try and fly a model to 300 meters and 60-sec- ond flight times without breaking an egg. The real fun is that there are three flights, and the egg is not checked until after the third flight. So, a contestant can have a great al- titude and time, only to be disquali- fied at the end of the event with a cracked egg. These models are fun to watch, as they are powered by E or F engines. 50 NOVEMBER/DECEMBER 2019 SPORT ROCKETRY Matt Steele took first place with three near-perfect flights. Allison Van Milligan (80 points, using an Apogee kit) edged out Stoil Avramov (176 points) and her sister Ashley (208 points) to take top honors in the Junior di- vision. S3A (A Parachute Duration) S3A is the event designation for the FAI A Parachute Duration event. It is flown in three rounds, with a 300 second max. The models must be at least 500 mm long, and a minimum diameter of 40mm for at least 50% of length. They feature huge 36" My- lar parachutes that try and get a 5-minute max time, and are spectacular to watch. It's really neat to see the sky filled with five or six of these models, all at different alti- tudes, usually in a thermal. These models are flown on A3-4T motors. S4A (A Rocket Glide) S4A is the event designation for the FAI A Rocket Glide event. It is similar to the NAR Rocket Glider event, where no jettisoned parts are permitted—in other words, everything that goes up must come back gliding. A max is 180 seconds in this event. The state of the art in this event are slick swing wings that flop the wing tips out. They look like a Rube Goldberg con- traption, but when they work, they trans- form into a sleek, high aspect ratio glider that goes on and on. Trip Barber flew Tom Beach's "Sta- tus Four" slide-wing rocket glider design. They do not always boost straight, and they are not the most competitive design for FAI flying. But, they delivered three good, straight flights and got Trip on the team for that event. Chris Flanigan and Don Carson flew European-style swing/flop-wing gliders but ran into problems. Peter Cook also flew scissor/flop wing designs. On his first flight, the model boosted very true—better than any of his previous S4A models, and the glide was OK. Unfortunately, during the second flight, the model "death-dived" after wing deployment and the model landed hard suffering a broken fuselage in the process. S5B/S5C (B/C Scale Altitude) S5 is the event designation for the FAI Scale Altitude event. S5 Scale Altitude is a challenging event that combines the points achieved for static craftsmanship on a scale Chris Flanigan launches his clustered/staged Saturn IB. Mike Nowak's Saturn V descending under parachutes.

