Sport Rocketry

Sport Rocketry 6.2019

Issue link: https://www.e-digitaleditions.com/i/1184256

Contents of this Issue

Navigation

Page 18 of 55

capsule for the egg. Her motor of choice was an Estes B6-4 and also used a piston/tower for launching. Re- covery was by a 30" space blanket Mylar chute with a small spill hole. Becky's single flight was focused on qualifying and not necessarily farming for thermals. Despite some melting of the model, it held together for best B Division flight. Chad Ring had one of the more entertaining flights. After an unsafe DQ on his first attempt he managed just over three minutes by deploying a mas- sive 55" parachute on his second flight. Chad used an FAI 40mm style model with an extra-long body tube to hold the chute with a minimum of folds. The egg lofter was launched from a 34" piston inside a 7' tall tower and was rewarded with a full inflation on the big chute. Chad was able to make the long-distance recovery from the tomato fields to the East, sealing first place in C Division. Several entries attempted using the new Quest Q- jet B4-4 composite motors with mixed results. The Flying I-Beam Kids team DQ'd their first attempt with a B4-4 when the piston tube failed to release. Their second flight used an Estes B6-4 and was also pis- ton launched from their 8' Boom Tube launcher. The model was 16" tall utilizing a short section of BT-20 for the motor tube and fins topped with a 5-mil poly- ester PET film shroud and 7" balloon for the egg cap- sule. They were able to hook a nice thermal for a 4+ minute duration and safe recovery, handily beating the rest of D Division. SPORT ROCKETRY NOVEMBER/DECEMBER 2019 19 Ryan Stenberg's egg duration parachute was made from an interesting holiday plastic material. It celebrated 1st place in A Division.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 6.2019