Marker and telling Ryan to sand it off. The
resulting airfoils were quite well done and
gave Ryan two very consistent flights.
In B Division, Becky Zurek used a toy
foam glider as a parasite on a BT-20 sized
model built with 3D printed nose cone and
fin unit. It boosted well and got help from
lift on flight number two, posting over two
minutes. Initially lost, the model showed
up at Lost & Found the next day.
Mark "Bunny" Bundick flew his 1970s
era designed "Parksley Eagle," featuring el-
liptical surfaces to win C Division. Wings
were built using 5.8 lb-ft3 balsa to mini-
mize weight and were covered in Japanese
tissue using clear dope. Bunny found nice
lift on both flights and his glide trim was
spot on.
D Division's winner Escape Velocity
(Buzz Nau, Mark Chrumka, and Al de la
Iglesia) used an original design based on Dr.
Jerry Gregorek's "Design Rules for Gliders"
(available at the NAR website: https://www.
nar.org/wp-content/uploads/2014/05/
Design-Rules-for-Gliders-Gregorek.pdf).
The model had a high aspect ratio balsa
wing and used reflective My-
lar on wing tips and rudder
to help timers keep it in sight.
The pod used a music wire
pin and two pieces of brass
tube to positively latch the
pod to the glider until ejec-
tion. Theirs was the highest
flight score of the event, with
the second flight topping an
impressive six minutes plus.
Well-trimmed A BGs,
boosted straight, with some
help from a thermal car-
ried the day at NARAM-61.
See you for 1/2A BG at
NARAM-62!
SPORT ROCKETRY NOVEMBER/DECEMBER 2019 21
A Boost Glider
Duration
A Division Time (sec)
1 Stenberg, Ryan* 214
2 Massoni, Zackary* 74
3 Pund, Madalynn* 72
B Division
1 Zurek, Rebecca* 162
2 Estrada, Ryan* 57
3 Van Milligan, Allison 29
C Division
1 Bundick, Mark* 275
2 Buckley, John 204
3 Gearhart, James* 188
D Division
1 Escape Velocity* 451
2 Sudden Impulse 280
3 Neutron Fusion* 263
* Denotes ESA qualified
Peter Cook prepares to launch.
Trevor Harrison tried a swing-
wing design in A B/G.