Sport Rocketry

Sport Rocketry 6.2019

Issue link: https://www.e-digitaleditions.com/i/1184256

Contents of this Issue

Navigation

Page 43 of 55

launch towers. These materials are remi- niscent of old-fashioned "erector set" parts and provided John with strong compo- nents for sturdy launch towers that could be taken apart for travel and storage and reconstructed for launch outings. Bruce Canino applied business intelli- gence software to an analysis of NRC con- test results from the year 2018-2019. His report illustrated the power, capabilities, and usefulness of this kind of software, suggesting it might be tool of interest to the NAR Contest Board. The "Royal Rock- eteers" team explored whether the instruc- tions provide with scale model kits could be made a lot better. Certainly scale mod- eling can be extremely challenging, even with a great kit, so it's great to see this topic come under scrutiny. Bernard Cawley took on a type of proj- ect that perhaps we don't see enough of in the NAR's R&D competition: He consid- ered a topic that had been studied before, and attempted to confirm or refute previ- ous findings, while at the same time may- be taking the state of the art a bit further. Bernard collected a great deal of data on whether or not venting of the body tube is really necessary for altimeters. This topic has been a part of earlier R&D, most no- tably by Chad Ring. Bernard confirmed Chad's findings, and through detailed test- ing concluded that while some pathway for equalization between internal and external air pressure is necessary for the proper functioning of all altimeters, this pathway does not have to be via dedicated vent holes in the body tube. More important- ly, Bernard found that the size of the vent holes didn't matter, and in many rockets there will be no real air seal even without vent holes, such that pressure equalization will occur regardless. Nonetheless, Bernard suggests that one or two tiny vent holes are a convenient and unobtrusive way to guar- antee an accurate altimeter reading. In A Division, it was streamers versus nose cones this year! Ryan Stenberg con- cluded that a two-string attachment made for better streamer performance (although 44 NOVEMBER/DECEMBER 2019 SPORT ROCKETRY Don Carson demonstrates using wire torsion rods to deploy flop-wing tips. not for competition use), while Zack Mas- soni found that an ogive nose cone shape achieved slightly better altitude than three other geometric shapes. C Divisioner Vern Richardson collected data from many test flights using pistons and 1/4A motors. His extensive research allowed him to con- clude that a particular piston length and diameter would lead to the best perfor- mance with 1/4A motors. Vern's final for- mula was to use a 27" long piston with a BT-4 tube diameter. Chad Ring showed us how an RTF model airplane, the "Whipit," could be converted into a radio-controlled rocket glider. If you ever wanted to enter the world of RC RG flying, Chad's report provides a great explanation of exactly how to get started. The always clever Bumbling Broth- ers Flying Circus team provided one of the most intriguing R&D entries in many years: They used historical data to attempt to reconstruct the performance of a Con- greve rocket. William Congreve was born in 1772 and became the most influential rocket scientist of his era, designing bal- listic missiles for military use. His rocket designs might be described as large bottle rockets, where a long trailing stick pro- vides aerodynamic stability. Team member Bob Alway described how they uncovered a set of data on how a 32-pound Congreve rocket performed during tests in India in 1816. Alway's team used this as the basis for building a kind of scale model of a Con- greve rocket, despite not having specific design specifications on the rocket. But the idea was to build the model and then com- pare flight characteristics extrapolated to the 1816 data, to see how well the model's characteristics could be lined up with the historical information. This was a fascinat- ing and entertaining project in every way, and illustrates the breadth of what can be done with model rocketry when applying clever and creative thinking. While the Alway brothers were explor- ing the past, Dan Wolf of the "Huh What?" team set his eyes on the future of altitude tracking. The investigation considered the theory of Global Navigation Satellite Sys- tems (GNSS) and Real Time Kinematics (RTK) error correction and data process- ing, to examine how these systems could theoretically provide a means to track alti- tudes of model rockets. The system would FOR ALL YOUR MOTOR NEEDS www.BalsaMachining.com We carry the complete Estes, Quest & Aerotech motor lines. Go to our website and see how you can save 25% off high power propellant and 20% off high power hardware using our pre-order program.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 6.2019