Issue link: https://www.e-digitaleditions.com/i/1220484
28 MARCH/APRIL 2020 SPORT ROCKETRY www.siriusrocketry.com motors - chutes - tools - adhesives - parts - great kits from the finest manufacturers - and so much more in our secure online store! It's now time to have some serious fun with rocketry, visit us today! The Sirius Rocketry Eradicator is the newest kit in our Transition Series of kits, rockets that fly comfortably on F & G motors and are built to fly on an H when you're ready for your level one! From model to High Power, we're serious about rocketry! Transition into fun! galore booth, which meant that I was most often seen holding a motor in one hand and a snowcone in the other. I'm putting off the sanding bit again aren't I? Sorry. It's a painful topic and dif- ficult to discuss in public. I proceeded to order BlueTube for my fuselage. The day it arrived was full of celebrations as my path to NARAM and certification had truly be- gun. Respectfully opening the package, I then rolled the tube on the floor to veri- fy that it was straight and true. A pristine tube ready for service. Step one: Fill in the spirals. If impres- sions were to be made with this rocket cre- ation, then none could be found on the rocket itself. I tried Elmer's wood filler, my go-to solution for hiding blemishes (Figure 3). Thinned out, it's easy to apply, but in my humid environment it takes a couple of days to dry out. The big plus is that Elmer's sands with ease. So much so that I use a long wooden sanding block to ensure I'm sanding flat (Figure 4). When using your hands or a sanding pad (foam) the softness will 'push' into the filled spots and sand the filler right out (Figure 5). Talk about chasing your tail. As I sanded, it rapidly became appar- ent that BlueTube and Elmer's cannot be compatibly married. The tube material is not absorbent (in the same way that kraft tubes are) and so the Elmer's would just sit there and fall off at the least perturbation. My Rudy III design was expected to reach Mach one if only for a half second or so, (Above) Figure 3. The easily sanded Elmer's Wood filler generously filling the spirals of a body tube and filling grain in balsa components. (Right) Figure 4: A hardwood sanding block ensures sanding against a flat surface (unlike a soft pad). The longer the block, the more uniformly-flat will be the sanded surface.

