Machinery Lubrication

Machinery Lubrication March-April 2020

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1222953

Contents of this Issue

Navigation

Page 44 of 88

42 | March - April 2020 | www . machinerylubrication.com TEST YOUR KNOWLEDGE This month, Machiner y Lubrication continues it s " Test Your Knowledge" sec tion in which we focus on a group of questions from Noria's Prac tice Exam for Level I Machine Lubrication Technician and Machine Lubricant Analyst. The answers are located at the bottom of this page. The complete 126-question prac tice test with expanded answers is available at store.noria.com. ANSWERS 1. D Other names for surface fatigue include contact fatigue, spalling, pitting, etc. It is associated with components such as anti-friction bearings, gear teeth at the pitch line, cams and rollers. Surface fatigue usually begins with denting due to the presence of particles. The dent forms a stress riser. Repeated cyclic loading causes surface fatigue, which eventually results in pits and then large spalls. 2. B The Karl Fischer test is used to quantify water content and is not used to detect or monitor oxidation. The other listed tests are used to detect or measure oxidation stability of oil. 3. A This is to assess the actual condition of the oil before it gets filtered. 1. Surface fatigue can be described as: A) Adhesion B) Pitting caused by surface corrosion C) Metal fracturing due to chemical damage D) Surface-initiated pit formation caused by cyclic loading E) Plastic deformation of the metal's surface 2. Oxidation stability is not detectable and not monitored with: A) Acid number B) Karl Fischer C) RPVOT D) Fourier transform infrared (FTIR) spectroscopy E) Voltammetry 3. Sampling a wet sump gearbox with a small oil circulation system should be done where? A) Downstream of the pump, upstream of the main pressure-line filter B) Downstream of the sump, upstream of the pump (before the pump) C) Downstream of the main pressure-line filter D) From the sump E) From the gearbox drain plug

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication March-April 2020