Issue link: https://www.e-digitaleditions.com/i/1283117
temperature environment for the external explosive material. While predicted per- formance was based on the standard Arcas drag data, the initial performance predic- tion proved optimistic; the Frangible Arcas had additional drag compared to a standard Arcas. Consequently, data from these initial tests flights established an accurate drag data characteristic for the Frangible Arcas. Systems Flight Tests Two flights of the complete systems ve- hicle were conducted: the first, on May 20, 1965, from PMR's San Nicolas Island test site; the second, on December 21, 1965. These units incorporated 0.042 inch thick sheet explosive material from the leading edge of the fin assembly to the forward edge of the fiberglass motor case. The ex- plosive material was not extended under the fin assembly as it was deemed unnec- essary for demonstrating fragmentation of the system in flight. The external sheet explosive was attached to the motor case by incorporating a silicone adhesive, pres- sure sensitive fiberglass tape as a base ma- terial. The sheet explosive was then over wrapped with a layer of aluminum coated, silicone adhesive pressure sensitive tape. Application of the external explosive ma- terial and overwrap increased the original vehicle diameter by 0.10 inch. Ejection of the access port door from the launch tube during flight AFFT-3 pro- vided an ejection velocity of about 60 ft/ sec and resulted in a significant reduction of vehicle performance. Although the flight was considered a "No Test," the increase in vehicle drag characteristics derived from the flight data provided accurate predicted performance for the systems vehicle. Flight AFFT-4 was the second and fi- nal systems vehicle to be flight tested in the program. It incorporated both the pri- mary and the redundant fragmentation ini- tiation systems. The payload consisted of a standard Arcasonde 1A telemetry package and a 15-foot diameter silk parachute with a non-reflective surface finish. A non-re- flective parachute was used to aid in radar tracking of the spent rocket motor assem- bly after payload ejection since radar data was to be used for determining the frag- mentation event. Radar data showed normal flight per- formance through an apogee altitude of 130,000 feet where payload ejection was 24 SEPTEMBER/OCTOBER 2020 SPORT ROCKETRY Patent Illustration

