Sport Rocketry

Sport Rocketry 5.2020

Issue link: https://www.e-digitaleditions.com/i/1283117

Contents of this Issue

Navigation

Page 36 of 55

Figure 3. RocketJunkies igniter wire feed through, machined version (right) and stand-alone version (left). before I pulled the trigger on the machin- ing. There is a slogan "measure twice, cut once," which can't be true enough. I worked up a CAD design, and I pro- duced an assembly rendering to verify that everything would fit. I had to move the altimeters around to fit under the CO 2 cartridge. After the initial design phase, I transferred the CAD designs to David, who made subsequent revisions directly in his version. David produced final 3D render- ings of the assembled bulkheads (see Fig- ures 4b and 9b). Once I was satisfied with the design, he began the fabrication. He took the final CAD designs and performed the Computer Aided Machining (CAM) and toolpath generation using the Fusion 360 tool. He machined the two bulkheads on a Computer Numerical Control (CNC) milling machine (see Figures 5a and 5b) out of ΒΌ thick aluminum stock. For larger diameter bulkheads, he additionally turns the edges in a lathe. A small dimple on the backside facilitated centering on the back- side. Systematic holes about the center (the threaded rod holes) support the piece in the lathe without a special tooling jig (I had him create a 7.5 inch diameter set of bulkheads several months prior). Da- Figure 4a. Drogue bulkhead CAD Design. Figure 3. Figure 4a. SPORT ROCKETRY SEPTEMBER/OCTOBER 2020 37 Quickly Locate Your Downed Rocket in MINUTES! Powerful Tracking Transmitters 2-9 Mile Ground Tracking Range/10+ Mile Air Tracking Range Lightweight Transmitters 2 Grams & up Waterproof Circuits Durable and Easily Transferred from Rocket to Rocket Telemetry Specialists Since 1970 Receiver Models Tracking from 3 to 200 Rockets Formerly Walston Retrieval TRACK YOUR ROCKET FROM LIFT OFF TO LANDING! 1202 Walnut Street Murphysboro, IL 62966 800-842-4537 Toll Free www.wmimodelaeronautics.com 618-687-3505 Fax: 618-687-3539 Email: mikec@caretrak.com

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 5.2020