Issue link: https://www.e-digitaleditions.com/i/1283117
10 SEPTEMBER/OCTOBER 2020 SPORT ROCKETRY The Design What does it take to launch a rocket with a 4kg payload to 10K or 30K feet? It depends...on a lot of parameters. Teams commonly eval- uated their designs with OpenRocket software simulation. Although there is no restriction on multi-stage rockets, all teams used a single stage rocket for simplicity. Starting with a nose, body, fins, and certified motor, OpenRocket simulation will predict apogee. A stable design is eventually chosen by adjusting shape and weight. Stability is determined by the relationship between center of pressure (shape) and center of gravity (weight dis- tribution). Stability is measure in caliber (body diameters). Spaceport America Cup guidelines (note 3) recommend a 2-6 caliber stability and absolute minimum of 1.5 caliber for flight certification. Dual-redun- dant deployment electronics are required with at least one commercial device and completely separate wiring and batteries. Spaceport Ameri- ca Cup guidelines are good for any rocket design. Teams submit a proj- ect paper in May that is scored and included in the team's final tally. Teams had a variety of methods to increase altitude accuracy but most just relied on simulation and testing predictions. UNM added a fifth fin and extra weight to reduce altitude to 10K feet. Some teams attempted air-braking devices but the complexity typically caused fail- ures. George Washington had a stabilizing rotor built into the nose, driven by a turbine using flight air. The rotor (flywheel) resisted lateral movement, maintaining vertical flight. Flight certification begins with a Flight Safety Review (FSR) that includes: payload secure, fins not flexible, body not flexible, couplers deep enough (one caliber) and secure, motor mounts secure, recov- ery system packing, clean electrical wiring, arming switches secure and accessible, rail guides hold weight of rocket, and at least 1.5 caliber stability. Norway team does final prep.

