Issue link: https://www.e-digitaleditions.com/i/1283117
34 SEPTEMBER/OCTOBER 2020 SPORT ROCKETRY kit, but matched it to use the same motors as the first kit I had in my car. (I wasn't sure how deep a dive I was going to make into this hobby, and wanted to limit my expenses.) The vendor encouraged me to challenge myself with a harder build than just skill level 1 or 2, and only slightly winced at my choice of a scale model kit (the IRIS). I assembled my first rocket, using only the spray paint lying around the house, and a tube of white glue left over from an Ikea shelf kit the summer before. I learned why you don't paint rockets robin egg blue, and why you want yellow wood glue, all in one rocket assembly. It would be a while before I learned to feather lead- ing edges and to seal the balsa fins before painting. I was so slow and cautious. But the point is that I was learning by doing. Let's jump ahead a couple of years now. If I had a nickel for every time I heard the following responses: "Why, I remember launching rockets back in (pick oneā¦) school, scouts, church camp, vacation up north." "Do they even still make those things?" And this highlights part of our problem. Unless we can find a way to con- The reasons why $5 is a good price point are: 1) The club can sell the kits at cost; 2) You don't have to make change; 3) Most parents might pop for a $5 kit that will engage their kid; 4) It's not too large an investment if it doesn't work out. Some manufactures/distributors will also give you a break if you pass out their business card along with the kits. Our club staples the card right to the kit package, as well as a handout that welcomes them to the hobby. Our sheet spells out a little about what's involved, the typical entry prices, stores that stock rocket supplies in every surrounding major city, as well as links to online resources, club directories, and basic safety information. We also partnered with those running Yuri's Night for the last three years, to set up a display table, a build-table, and run a simple launch on the lawn outside before sunset. (Yuri's Night is a global celebration of space exploration, with events held ev- ery April in commemoration of the first human spaceflight, made by Yuri Gagarin on April 12, 1961.) This gets kids involved hands-on, and also to engage various fam- ily members in the experience. We have been asked to return several times. But the question remains, what will happen to the seeds of interest we sow? What will come of this attempt to intro- duce a new generation to our hobby? Cer- tainly, it can't hurt to showcase our hobby. What are you doing to sow the next generations of racketeers? We'd be inter- ested in learning of your ideas and success stories. Send them into Sport Rocketry so we might all benefit. tinue the interest and bring model rock- etry back in front of the eyes of the public, the interest dies out even as boys discover girls, cars, and music. This is one reason why the movie "October Sky" has been so valuable to our hobby and industry. It keeps the idea alive and demonstrates it. So what is your club or organization doing to renew interest in our field? How are you seeding the future? One easy step is to buy a DVD or Blu- ray copy of "October Sky" and donate it to your local library. Better yet, arrange for a free showing of the movie at the library, school, or church youth group. Get it seen! Another more challenging step would be to hold a public open house at a club launch, and invite the public to come watch the flights. (I know, there are safety and other issues, but I survived my first visit.) This can be as simple as piggyback- ing upon a space-related event near Day- ton, Cape Kennedy, Huntsville, or similar venue...or as opportunistic as a local air- show at a small rural airport. Any place they allow either demonstration flights, or at least an information table to be set up. Which leads us to the third idea: Many clubs not only have an information table, but also sell an intro level kit at cost and/ or have a build table at hand. A very sim- ple rocket kit can be had in bulk supplies from eRockets, Estes, Balsa Machining, or other sources. With a bulk purchase, you could find the price per rocket kit as low as $5. Some clubs will bundle the price of the appropriate motor(s) for another $2-3 dollars, with the understanding that there will be supervised launches late in the day (Got to let the glue set-up!).

