Issue link: https://www.e-digitaleditions.com/i/1283117
54 SEPTEMBER/OCTOBER 2020 SPORT ROCKETRY Next is the Airfoil Assistants Fin Airfoil Sanding Blocks. Each block has grooves de- signed for leading and trailing edges (although rounding both using the leading edge groove is common for sport models and NCR kits). Here's what each block was designed for: • Small - 1/32" plywood and 0.030" to 0.0625" G10 • Medium - 1/16" to 3/32" balsa and plywood • Large - 1/8" to 1/4" balsa and plywood Colors may vary. List Price: $24.99. The next new product is the Big Handy Stand. The Big Handy Stand can help you during the assembly and painting of model rockets. This set includes for use with one 29mm motor mount, and up to three 18mm and 13mm motor mounts. It can easily be adapted for 24mm motor mounts (adapter not included). List price for the Big Handy Stand is $29.99. And finally, NCR is introducing the NCR 36" Ripstop Nylon High Visibility Parachute. Suitable for all NCR kits, this is a high quality ripstop Nylon parachute made ex- clusively for NCR. The parachute features a black pattern printed on orange material for high visibility in the air and on the ground. The material is lightweight and not stiff. These chutes fold easy for easy unfurling in flight. List price for the NCR 36" Ripstop Nylon High Vis- ibility Parachute is $17.79. All items are available from NCR at www.northcoastrocketry.com, Apogee Components, or eRockets. Altus Metrum Looking for electronics to fit in something small? Try the Altus Metrum Easy Timer. This board provides two programmable timer-based pyro channels with tilt limits. It is the same size/shape with the same connector layout as their EasyMini flight computer. The IMU used is the same as the company's TeleMega and EasyMega, allowing ac- celeration based launch detection, and gyro-based tilt limiting. This means it's possible to configure a pyro event for some amount of time after launch, or after motor burnout, etc, with the possibility of locking out each event if the rocket is tilted too far away from vertical. For projects that require staging or air starts, EasyTimer is a low-cost alternative to use while retaining the safety aspects of tilt-limiting. The Easy Timer retails for $80.00, can be ordered via the Altus Metrum website at www.altusmetrum.org. Dynasoar Rocketry Frank Burke at Dynasoar Rocketry continues to crank out rocket-boosted R/C gliders on what seems to be a monthly basis. His innovative designs can be found at just about any club's model rocketry launch around the nation these days. His latest offering is the impressive Mig-25 Foxbat R/C glider kit. Based on the famous Russian Mach 3+ interceptor, the kit features a high-mounted wing spar that has been pre- installed, a plastic nose cone, 2.6" tubing for the body and Depron wing and tail surfaces. All elevons are pre-hinged. The body tube end is pre-cut at an angle and the rail button holes have been pre-punched. Even the novice will find this one easy to assemble! The Mig-25 Foxbat measured 37" long with a 23.5" wingspan, and weighs in at 10.75 ounces ready to fly. The kit sells for $70.99 shipped. To learn more about this great kit, and other R/C gliders and supplies in their product line, visit the Dynasoar Rocketry website at www.dynasoarrocketry.com.

