ICT Today

ICT Today October/November/December 2020

Issue link: https://www.e-digitaleditions.com/i/1284149

Contents of this Issue

Navigation

Page 19 of 79

20 I ICT TODAY • Radio frequency communication requires radio circuits, antennas and complex receivers, whereas Li-Fi is much simpler and uses direct modulation methods similar to those used in low-cost infrared communications devices, such as remote control units. LED light bulbs have high intensities and therefore can achieve very large data rates. • Li-Fi can deliver multiple Gb/s speeds in mobile devices. This next generation technology will drive wireless beyond any current capability, opening up unprecedented bandwidth. • Light can be contained and secured in a physical space. Li-Fi enables additional control as it offers precise localization for asset tracking and user authentication. Interestingly,"Li-Fi would not work if the device is in your pocket or bag, unless there is a transparent cover. Li-Fi is a complimentary technology that works alongside other wireless technologies such as Wi-Fi. If the light signal to a Li-Fi enabled device is below the receiver's threshold, then it will not receive data. In that instance, radio systems or cellular networks, if available, will continue to deliver data. However, the moment the device begins to receive light from a Li-Fi light bulb [or luminaire], then the device will resume high speed communications using light as an additional communications medium." 12 Furthermore, "Li-Fi currently offers latency by a factor of three times lower than Wi-Fi and can radi- cally enable innovation, automation, and applications, such as virtual reality and augmented reality." 13 At a minimum, ICT designers and installers should keep in mind the differences between Li-Fi and Wi-Fi as illustrated in Table 1. Li-Fi SECURITY CONSIDERATIONS The active area of Li-Fi is confined to the area where light is distributed (where light touches). The signal remains hidden to anyone outside this area. The light is controlla- ble by shutting the door or pulling the blinds to protect the network. This makes it more secure and easier to con- trol access to a network. As long as transparent materials, such as windows, are covered, access to a Li-Fi channel is limited to devices inside the room. 14 Since light cannot penetrate through walls, accessing data from a light that is in the other room is not possible. This may be an inconvenience, but it also presents a great security feature. According to pureLiFi, existing security protocols for encryption and authentication can be leveraged in Li-Fi systems to provide even better secured wireless systems. APPLICABLE STANDARDS TO Li-Fi INSTALLATIONS Standards applicable to the installation of a Li-Fi system would be those relevant to the installation of telecom- munications and structured cabling systems, as well as all electrical standards applicable to the installation of lighting and energy efficiency. Li-Fi Wi-Fi Operation Uses LED Uses modem Data Transfer Speed >1 Gb/s About 150 Mb/s Security High Low Cost Lower, visible light spectrum is free Higher, radio spectrum requires license Power Consumption Potentially Less More TABLE 1: Essential differences between Li-Fi and Wi-Fi. Until the Li-Fi technology is firmly established, the following standards, including but not limited to, shall be complied with for all Li-Fi installations. Close coordination with the authority having jurisdiction (AHJ) inspectors and plan reviewers will be necessary.

Articles in this issue

Archives of this issue

view archives of ICT Today - ICT Today October/November/December 2020