ICT Today

ICT Today October/November/December 2020

Issue link: https://www.e-digitaleditions.com/i/1284149

Contents of this Issue

Navigation

Page 49 of 79

50 I ICT TODAY 2016 2018 2019 2020 2021 2017 0 100 200 300 400 500 600 Installed Workloads in Millions Traditional Data Center (-5% CGAR) Cloud Data Center (22% CGAR) 19% CGAR 2016-2021 13% CGAR 2016-2021 17% 83% 6% 94% FIGURE 4: Workloads/compute instance: traditional data center versus cloud data center. Source: Cisco Global Cloud Index, 2016-2021. 8GFC 16GFC 32GFC 64GFC 128GFC 256GFC 512GFC 1TFC Fibre Channel Speed Speed in Development Speed in Development FCoE Speed Speed in Development Possible Future Speed 10GFCoE 40GFCoE 25GFCoE 100GFCoE 400GFCoE 50GFCoE 2005 2010 2020 2025 2015 Serial Lane in SFP Quad Lane in QSFP 100GFCoE 200GFCoE FIGURE 3: Information from FCIA's Fibre Channel Roadmap. specifications for 128 GFC serial lanes. Newly developed Fibre Channel over Ethernet (FCoE) allows FC protocols to run over Ethernet networks. Fibre Channel is com- pleting development of a standard that maps FC to Non-Volatile Memory Express over Fabrics (NVMe-oF), allowing increased network performance and lower latency. Figure 3 shows the Fibre Channel Industry Association's (FCIA) Roadmap for Fibre Channel, which will continue to remain a major application area for MMF and VCSELs. Data Center Trends The single biggest trend for data centers in the last few years has been the accelerated migration to public and private cloud data centers. Traditional non-cloud enterprise data centers are becoming a much smaller segment of the data center market; large enterprises are building their own cloud data centers, and smaller enterprises are using cloud services. The widely cited and well-regarded Cisco Global Cloud Index (GCI) 2016-2021 6 predicts that by 2021: • 94 percent of workloads and compute instances will be processed by cloud data centers, while six percent will be processed by traditional enterprise data centers (Figure 4). For distances less than 100 to 150 m, MMF is the solution of choice, while SMF is typically used for longer links. Direct-attach copper (DAC) cables are often used for reaches less than 5 m.

Articles in this issue

Archives of this issue

view archives of ICT Today - ICT Today October/November/December 2020