Issue link: https://www.e-digitaleditions.com/i/1284149
56 I ICT TODAY 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 FIGURE 13: MMF vs. SMF 25 to 400 Gb/s modules, 2010-2021. Source: LightCounting. and data rates increased and the cost structure declined. Over the past five years, the percentage of MMF modules, once the dominant optical module type, has declined relative to the percentage of SMF modules for data rates of 25 to 400 Gb/s. It is important to note, however, that the relative decline of MMF modules in comparison to SMF modules does not mean that MMF module ship- ments, themselves, are declining. Indeed, a LightCounting forecast (Figure 13) shows strong projected growth for MMF modules along with the growth of SMF modules. 21 The future for MMF links continues to be bright! PART 2: STANDARDS UPDATE FOR MMF IN THE ENTERPRISE Enterprise network customers and vendors—in fact, the entire telecommunications/ICT industry—benefit from interoperable multivendor industry standards developed through the interaction and coordination between several important organizations. These include component and optical fiber standards from TIA and IEC, structured cabling standards from ANSI/TIA, ANSI/BICSI and ISO/IEC, as well as application standards developed by IEEE and Fibre Channel. The ability to meet market demand for speed and transmission capacity standards cannot be overstated. For example, the growth of OM3 fiber, now ubiqui- tous in enterprise networks, was highly dependent on Ethernet standards like 10GBASE-SR and Fibre Channel standards like 4GFC and 8GFC. Demand growth for OM4 fiber is based on standards, including 10GBASE-SR, 40GBASE- SR4, 100GBASE-SR4 and 16GFC/32GFC. MMF vs SMF - 25G to 400G Speed Modules Only The work of these standards organizations, along with industry MSAs, is vital to meet market demands for new applications. Evolving Ethernet Standards for Multimode Fiber Often, new standards are developed or revised to take advantage of higher performance capabilities of new products. Within the last few years, for example, TIA and IEC developed the OM5 specification for MMF. This extends the 850 nm performance of OM4 fiber out to 953 nm in order to take advantage of evolving SWDM multimode VCSEL technology. These standards bodies are also characterizing legacy OM3 and OM4 bandwidth to further support SWDM applications in brownfield installations; for example, IEC Subcommittee 86A, Fibres and Cables, published IEC 60793-2-10:2019 in May 2019. This document contains specifications for all category A1 multimode fibers.

