ICT Today

ICT Today October/November/December 2020

Issue link: https://www.e-digitaleditions.com/i/1284149

Contents of this Issue

Navigation

Page 57 of 79

58 I ICT TODAY MMF Developments in IEEE 802.3bs and 802.3cd In December 2017, references specifying 100 m reach for 400GBASE-SR16 over OM4/OM5 MMF were included in IEEE Std 802.3bs™-2017, 200 Gb/s and 400 Gb/s Ethernet. In December 2018, the same During the February 2019 Fibre Channel meeting, different multimode solutions for 128 GFC were discussed. Based on a straw poll, there was unanimous support for consideration of the following: • A true serial 128 GFC variant • A multi-wavelength variant 56 Gb/s BiDi solution • A multi-wavelength variant 56 Gb/s codirectional (CoDi) solution One of the most interesting contributions made in July 2019 was a technical proposal by Finisar, which suggested that serial 128 GFC could be accomplished by using VCSELs centered around 940 nm, rather than the traditional 850 nm. Meeting the target completion dates and all require- ments per FC-PI-8 MRD will be very challenging; there are complex technical and market questions that will need to be resolved. Purchase the 14th Edition TDMM Detailing the Standards and Best Practices Related to Modern Cabling Design VISIT BICSI.ORG/TDMM FOR DETAILS. 100 m references were included in IEEE 802.3cd, 50 Gb/s, 100 Gb/s, and 200 Gb/s Ethernet for 50GBASE-SR, 100GBASE-SR2 and 200GBASE-SR4. The supported link distance for OM5 is equal to OM4 because all these links operate only at 850 nm. IEEE P802.3cm 400 Gb/s over Multimode Fiber Task Force The IEEE P802.3cm Task Force met in May 2018 to begin work to "Define a physical layer specification that supports 400 Gb/s operation over 8 pairs of MMF with lengths up to at least 100 m." Additionally, the Task Force is to "Define a physical layer specification that supports 400 Gb/s operation over 4 pairs of MMF with lengths up to at least 100 m." This was based on the work of the IEEE 802.3 Next-generation 200 Gb/s and 400 Gb/s MMF Study Group, which established the need for next generation multimode 400 Gb/s solutions. These solutions were designed to leverage recent technology advancements, including: • Multiple wavelengths on MMF, first commercially introduced in 2013 in 40 Gb BiDi modules • VCSELs supporting 50 Gb/s 4-level pulse amplitude modulation (PAM4) signaling, while leveraging the historical multimode/VCSEL link advantages that include: Relaxed alignment tolerances (~10x) for lasers, multiplexers/ demultiplexers, and connectors Greater resiliency to dirt Lower drive currents (5-10 milliamps [mA] vs. 50-60 mA) On-wafer testing

Articles in this issue

Links on this page

Archives of this issue

view archives of ICT Today - ICT Today October/November/December 2020