ICT Today

ICT Today October/November/December 2020

Issue link: https://www.e-digitaleditions.com/i/1284149

Contents of this Issue

Navigation

Page 59 of 79

60 I ICT TODAY Providing a low-cost point-to-point link, 400G-SR4.2 will also support a 4x100G breakout, although 100G-SR1.2 is not an IEEE standard. A 4x4 fiber shuffle allows a 32-port 400G switch to be used as a 128-port 100G switch (Figure 16). Additionally, 400G-SR8 is an 8 fiber-pair solution supporting link distances up to 70 m on OM3 fiber and 100 m using OM4/OM5. Either single-row MPO-16 or 24-fiber MPO (MPO-12 two-row) can be used as the connector interface (Figure 17). FIGURE 16: 400GBASE-SR4.2 point-to-point, breakout and shuffle modes. [LEFT] SR4.2 Low Cost Point-to-Point Link [RIGHT] SR4.2 4 x 100G breakout [LEFT] 4 x 4 fiber shuffle allows a 32-port 400G switch to be used as a 128-port 100G switch SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR4.2 SR1.2 SR1.2 SR1.2 SR1.2 SR4.2 FIGURE 17: 400G-SR8 adopted connector options for MDI. 24

Articles in this issue

Archives of this issue

view archives of ICT Today - ICT Today October/November/December 2020