Issue link: https://www.e-digitaleditions.com/i/1293193
Course Listings 2020-2021 Learn a procedure or specification to perform out-of-position welds to meet and qualify to a code or standard with focus on vertical and overhead welding using the shielded metal arc welding (SMAW) process. Prerequisites: None. WTO121 140 Clock Hours Welding (GMAW) Identify and learn how to read welding detail drawings with welding symbols, using notes and bill of materials. Train in safety procedures, general equipment, filler materials and shielding gases used and how to make fillet and groove welds in various positions for gas metal arc welding (GMAW). Prerequisites: None. WTO122 116 Clock Hours Welding (FCAW) Explore characteristics, properties, composition and classification of common ferrous and nonferrous metals along with preheating and post-heating procedures used for weld quality. Train in safety procedures, general equipment, filler materials and shielding gases used and how to make fillet and groove welds in various positions for flux-cored arc welding (FCAW). Prerequisites: None. WTO123 70 Clock Hours Welding (GTAW) Carbon Steel Learn welding equipment setup, safety and the different use of filler materials and shielding gases. Perform demonstrated welding techniques with fillet and groove welds in various positions on carbon steel, using gas tungsten arc welding (GTAW). Prerequisites: None. WTO131 150 Clock Hours Weld Techniques Pipe (SMAW) Learn welding equipment setup and safety practices for welding pipe with an electric arc welding process, using open-root groove welds. Gain knowledge on procedures for the preparation of open-root V-groove welds in various positions on carbon steel pipe using the shielded metal arc welding (SMAW) process. Prerequisites: None. WTO133 176 Clock Hours Weld Techniques Pipe (GTAW) Learn welding equipment setup and safety for welding pipe with a gas tungsten arc welding process, using open-root groove welds. Gain knowledge on procedures for the preparation of open-root V-groove welds in various positions on carbon steel pipe using the gas tungsten arc welding (GTAW) process. Prerequisites: None. WTO145 224 Clock Hours Carbon Steel (GTAW) Learn welding equipment setup, safety, and the different uses of filler materials and shielding gases in the gas 390