Issue link: https://www.e-digitaleditions.com/i/1342663
Pentair P/N Kit p/n: 3430-0876 (HM1) Kit p/n: 3430-0929 (HM4) Kit p/n: 3430-0941 (HM5) Operating Pressure (max) Inlet/outlet: 3000 PSI [270 Bar] Regulated Flow 14 GPM [53 LPM] -Bypass Port Plugged[0 gpm Bypass] 15 GPM [57 LPM] -Bypass Port open[15 gpm Bypass] 8 GPM [31 LPM] -Bypass Port Plugged[0 gpm Bypass] 15 GPM [57 LPM] -Bypass Port open[10 gpm Bypass] 31 GPM [117 LPM] -Bypass Port Plugged[0 gpm Bypass] 32 GPM [121 LPM] -Bypass Port open [15 gpm Bypass] Technical Details Electrical: Voltage: 12 VDC Frequency: 110 Hz Valve Type: Normally Closed Proportional Flow Control Kit P/N 3430-0876 HM1 + 3430-0929 HM4: Threshold (Activation) Current: 350+/-100 mA Kit P/N 3430-0941 HM5: Threshold (Activation) Current: 300+/-100 mA Max. Control Current: 1600+/-200 mA Initial Current Draw: 2.7 amps Power: 32.8 watts Resistance: 4.5 ohms at 68 degree F (20 degree C) Storage Temperature: 32 to 140 degrees F (0 to 60 degrees C) Fluids: Mineral based or synthetic hydraulic fluid at viscosities of 7.4 to 420 cSt Hydraulic Control Assembly for HM Series Motors The hydraulic control assembly is designed to work with a digital controller with PWM signal output. As the signal current increases, the hydraulic flow control valve opens. The Hypro hydraulic control assembly is designed to directly mount to modified Hypro HM series hydraulic motors. The control assembly provides a convenient solution for increased efficiency and damage prevention from abuse conditions. OUT IN CV2 PV BYPASS CV1 M2 M1 NEW