Sport Rocketry

Sport Rocketry 2.2021

Issue link: https://www.e-digitaleditions.com/i/1345417

Contents of this Issue

Navigation

Page 39 of 47

If you're anything like me, you have a lot of rockets in your fleet. And like me, you probably have a bunch you haven't flown in years. You know, like that rocket you built back in '97 that's been sitting in a storage bin collecting dust? You were ex- 40 MARCH/APRIL 2021 SPORT ROCKETRY by Mike Moran NAR 216855 Revitalize Your Fleet: Reuse, Rebuild, and Revitalize Your Fleet: Revitalize Your Fleet: Reuse, Rebuild, and Reuse, Rebuild, and do something about it. Several I gave away, one I donated, and two I decided to morph into at least one new rocket. Perhaps every modeler, at one time or another, has considered reusing parts from a crashed or damaged rocket. But to take apart two working rockets and combine them into at least one new rocket is prob- ably a new challenge for most of us. This was definitely a new adventure for me, and the results were better than expected. And it only cost about $5 to do it. The rockets I chose for my rebuild were my Sky Sabre and Soyuz 70. They both have BT-60 main tubes so mating them would be fairly easy. Both were in working order and had flown successfully. The Sky Sabre is a 51" scratch-built that I have flown dozens of times over the past seven years. The Soyuz 70 is also a scratch- built, about 42" tall with a BT-70 payload section. It was first launched in 2017 and only flown four times. Both rockets used 24mm engines and have altitudes ranging from 900 to 1100 feet. When I started, I really didn't have an idea of how I wanted the new rockets to look. But I did have an idea of how they could look. About halfway through the disassembly process, I saw an article from cited when you first bought it; you had fun building it; you were anxious when you first flew it. But over time some of the nov- elty has worn off. Maybe it was damaged and you never got around to fixing it. Or maybe you've simply moved on from its design and technology. Whatever the case, I have many such rockets, so I decided to The starting point: My Soyuz 70 (left) and Sky Sabre scratch built rockets. Above: Where to cut? The Soyuz 70 gets the first incision. Right: The top of the Soyuz will become the top of the new SLS model. Peeling away the body tubes to recover couplers and baffles.

Articles in this issue

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2021