Sport Rocketry

Sport Rocketry 2.2021

Issue link: https://www.e-digitaleditions.com/i/1345417

Contents of this Issue

Navigation

Page 20 of 47

by Matthew Johnson After discovering a free "paper model" version of Star Trek: First Contact's first warp drive spacecraft, the Phoenix, on the Internet, I was curious what kind of flying model it would produce. My first step was to increase the size of the model by some 400% to pro- duce the three-foot model I would fly. Once the model was increased to that size, a three- foot length of BT-70 would fit right through the model to provide a nice internal structure. The only major structural improvement was the insertion of three layers of foam board cut to fit the warp engine pylons. These were inserted into the body structure to provide a "through-the-wall" support. After careful study, I determined that the model would be better off with a set of clear fins and a healthy nose weight. I built a fin can that could be screwed on with an existing Estes engine retainer and painted it with "engine exhaust" motif. The result was a stunning three-foot model that flies great on an F44-4! SPORT ROCKETRY MARCH/APRIL 2021 21 Fly the Star Trek: First Contact Phoenix

Articles in this issue

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2021