with SRBs as you watch them climb.
All In all, this was an enjoyable build.
On the skill scale, I would probably put
it at a skill level 3. It was fairly challeng-
ing except for attaching the 70's SRBs. Of
course, it would have been a lot easier to
just use 4 fins and lug style standoffs. But
that's the beauty of a rendition: it allows
you to be creative. And I have to admit,
this six-fin setup really flies straight and is
as solid as a rock!
26 MARCH/APRIL 2021 SPORT ROCKETRY
ARA Press
785 Jefferson Ave.
Livermore, CA 94550
(925) 583-5126
www.arapress.com
ARA Press
The Spaceship Enthusiasts'
One-Stop Data Shop!
Now Available
for Pre-order!
Five years in the making by Air
Force historian Dr. Roy Houchin,
with full access to all official
documents, this will be the definitive
work on the program for some time
to come.
Ships late March
Please visit our website to order
on-line.
Credit Cards and PayPal accepted.
Call or write "info@arapress.com"
for shipping options.
Sales Tax added for CA orders
Only $39.95! (plus shipping)
Dyna-Soar: Its History,
Military Missions and
Legacy to the X-37B
• Foreword by Dyna-Soar Pilot Al Crews
• PART I - THE DYNA-SOAR PROGRAM
• PART II - THE DYNA-SOAR VEHICLE
• Glossary of Acronyms and Program
Names
• Appendix - The Modeling World
• Hundreds of photographs and illustra-
tions, most in color
• Dimensioned Drawings of the Dyna-
Soar and Boosters.
• 215 Pages, 80 lb. coated stock
• Smythe-sewn Hardcover binding
Figure 9. For the OmegA 70, the
SRB mounting dowels go all the way
through holes drilled through the
main tube and the SRB tubes
for a stronger mount.
Figure 10. The fin shown on
top here will pass through
slots in the SRB. The similar
fin on the opposite side is not
yet glued on in this photo.
Figure 11. The slots on opposite sides
of the base of the SRBs must be cut
carefully to fit the fin.