Sport Rocketry

Sport Rocketry 2.2021

Issue link: https://www.e-digitaleditions.com/i/1345417

Contents of this Issue

Navigation

Page 28 of 47

Getting Started We rewind this tale of rescued rockets to the summer of 2019. I had just pulled a bunch of cardboard tubes out of a dump- ster (Figure 1). Admittedly, they sat in my basement untouched for a good month or two. My stumbling block was that I hadn't figured out how I could make durable, re- spectable nose cones for the non-standard tube sizes. Without an end game in mind I had little motivation to get started. The breakthrough I needed occurred when I bumped into Mr. Jai Narula with Code Ninjas in Hillsborough, New Jersey. Code Ninjas teaches computer program- ming to kids and Jai was a "sensei" at their "dojo" of coding. As it turns out, Jai was also able to teach this old dog a new trick. The facility had a 3D printer that they used to introduce the technology to kids as part of their curriculum. While I was on site waiting for my son to complete his coursework, Jai generously (and patiently) showed me the process of preparing a 3D digital model for printing as he initiated a new print. I left the facility feeling confi- dent that 3D printing was something that I could pull off. I felt I could create a 3D print, but how would I create the design for the printer? Sure, there are lots of free 3D printable files available all over the Internet, but I had custom needs. Unless I could create a 3D design for my non-standard sized tubes myself I would still be stuck at square one. The solution came from a back issue of Sport Rocketry magazine. I recalled read- ing an article about producing single-piece fin cans using 3D printing to end up with a set of fins that was practically perfect- ly straight. When I first read the article I found it engaging but since I had no 3D printer at the time I absorbed the article as more of an interesting curiosity. Now that article would prove pivotal in my quest to make rubbish fly. Within that article was an introduction to Onshape, a free-to-hob- byists digital 3D drafting software applica- tion. I had no 3D drafting experience, but after spending some time going through tutorials I had created my first simple 3D nose cone digital design (Figure 2). At that point I was confident I could produce a nose cone with the custom di- mensions I would need, but I still had doubts. I had anecdotally heard that 3D printed parts might not be strong enough for rigorous rocketry applications. Since I intended to use my product for high- power rockets I wanted something tough. I crossed another bridge of progress when I discovered epoxy resin that sets up strong and rigid but can be combined with glass micro-balloons that can be mixed into the resin to make it lighter. An email exchange with Mr. Randy Boadway of eRockets.biz was promising when I inquired about my intended application for the resin. He had SPORT ROCKETRY MARCH/APRIL 2021 29 Minimum Diameter Retainer Tool-Free Threaded Motor Mounts » » » Quick-Change Motor Retainers, Tailcone Motor Retainers, Min-Diam Motor Retainers, Motor Adapters Stainless Steel Ball Bearing Swivels, Stainless Steel Recovery Hardware, 1010 & 1515 Low-Drag Rail Guides 54mm to 3.9" Tailcone Retainer 75mm Flange Type Retainer 54mm Standard Retainer » phone: 858.566.2900 http://aeropack.net aeropack@san.rr.com Made in USA a Dumpster Fire "Resourceful" Scratch Builder a Dumpster Fire a Dumpster Fire "Resourceful" Scratch Builder "Resourceful" Scratch Builder

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2021