Sport Rocketry

Sport Rocketry 2.2021

Issue link: https://www.e-digitaleditions.com/i/1345417

Contents of this Issue

Navigation

Page 33 of 47

Lessons Learned in Scratch Building Below I'll summarize some of what I've learned during my dumpster-diving, scratch- building adventure: Body Tubes: • Strong, thick-walled, cardboard tubes are routinely discarded and can probably be obtained for free with a bit of legwork. The wall thickness makes the tubes robust but also heavy. In my case, the club that I fly with has a 4,500-foot altitude limit so altitude performance is not an issue for me, and I'm OK with my rockets not being super lean. • Sources of tubes that I have found fruitful include: - Carpet suppliers - Custom upholstery and curtain producers (materials often received on large rolls with heavy-duty cardboard cores) - Home improvement stores - Used shipping tubes - Shipping tube retailers (e.g. Yazoo Mills) • Some cardboard tubes not originally intended for rocket airframe use have inter-layer bonds that are not as strong as you might expect from purpose-made tubes. For that reason I always use through-the-wall fin mounting or drill countersunk mounting holes for surface-mounted parts like aluminum rail guides. That ensures that parts are bonded to more than just one surface layer that could peel away from the air- frame. I also use a layer of light fiberglass on some airframes. Nose Cones: • 3D printing is widely accessible and produces precision custom parts for rocketry. • 3D printed parts can be reinforced with more traditional materials or can make excel- lent casts and molds for composites, but natively durable parts can be produced with the right combination of printing materials and settings. • 3D drafting software can be obtained for free to hobbyists (e.g. Onshape, TinkerCAD, 34 MARCH/APRIL 2021 SPORT ROCKETRY Fusion 360). Free tutorials and online resources are widely available to the 3D drafting newbie. I won't say the learning process is painless for the uninitiated, but 3D drafting capability offers incredible versatility to the rocket scratch builder and the skill spills over into practically unlim- ited applications outside of rocketry and there are tons of free learning resources online. • The learning curve and startup cost for 3D printing can be substantial and aren't justifiable for a few parts. However, if you're already 3D print- ing or have additional 3D printing aspirations it's a great asset for your toolset. For the long-term rocket addict it opens lots of doors and, like 3D drafting, has wide-reaching applications beyond just rocketry. • In hindsight, if I were buying a new 3D printer for rocketry specifically I would consider a filament-based system capable of printing in ABS mate- rial. The resin-based system is capable of incredible fine detail (great for goals like small scale models or figurines) but that intricacy isn't neces- sary for smooth nose cones or most rocketry parts and comes with the disadvantage of typically very small build volumes (for affordable sys- tems) that require printing large parts in several pieces. • Alternatively, 3D printed designs can be uploaded to online 3D produc- tion services (e.g., Sculpteo also produces 3D parts), but based on my (non-exhaustive) research this option is cost-prohibitive for rocketry and one could probably purchase a complete rocket kit for the cost of a single comparably sized 3D printed custom nosecone from an online source. Precision Plywood Parts: • Aforementioned 3D drafting tools can also be used to produce 2D de- signs for precision plywood centering rings or fins. • 2D designs can be uploaded to online laser-cutting services with com- pleted parts shipped to your home cost effectively. I have had success with Sculpteo, but many alternatives also exist. Figure 11. Figure 12.

Articles in this issue

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2021