Issue link: https://www.e-digitaleditions.com/i/1345417
If you're anything like me, you have a lot of rockets in your fleet. And like me, you probably have a bunch you haven't flown in years. You know, like that rocket you built back in '97 that's been sitting in a storage bin collecting dust? You were ex- 40 MARCH/APRIL 2021 SPORT ROCKETRY by Mike Moran NAR 216855 Revitalize Your Fleet: Reuse, Rebuild, and Revitalize Your Fleet: Revitalize Your Fleet: Reuse, Rebuild, and Reuse, Rebuild, and do something about it. Several I gave away, one I donated, and two I decided to morph into at least one new rocket. Perhaps every modeler, at one time or another, has considered reusing parts from a crashed or damaged rocket. But to take apart two working rockets and combine them into at least one new rocket is prob- ably a new challenge for most of us. This was definitely a new adventure for me, and the results were better than expected. And it only cost about $5 to do it. The rockets I chose for my rebuild were my Sky Sabre and Soyuz 70. They both have BT-60 main tubes so mating them would be fairly easy. Both were in working order and had flown successfully. The Sky Sabre is a 51" scratch-built that I have flown dozens of times over the past seven years. The Soyuz 70 is also a scratch- built, about 42" tall with a BT-70 payload section. It was first launched in 2017 and only flown four times. Both rockets used 24mm engines and have altitudes ranging from 900 to 1100 feet. When I started, I really didn't have an idea of how I wanted the new rockets to look. But I did have an idea of how they could look. About halfway through the disassembly process, I saw an article from cited when you first bought it; you had fun building it; you were anxious when you first flew it. But over time some of the nov- elty has worn off. Maybe it was damaged and you never got around to fixing it. Or maybe you've simply moved on from its design and technology. Whatever the case, I have many such rockets, so I decided to The starting point: My Soyuz 70 (left) and Sky Sabre scratch built rockets. Above: Where to cut? The Soyuz 70 gets the first incision. Right: The top of the Soyuz will become the top of the new SLS model. Peeling away the body tubes to recover couplers and baffles.

