Machinery Lubrication

Machinery Lubrication May June 2013

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/136253

Contents of this Issue

Navigation

Page 20 of 59

OIL SAMPLE CONTAINER The SureSample utilizes a vacuum-seal design to transform the sampling process. The container, which can draw any practical viscosity in seconds, allows for hands-free sampling with no pumps or other devices required. The pre-charged vacuum ensures ultraclean sample collections while eliminating the possibility of cross-contamination. SureSample also prevents oil spills, keeping oil away from the user and the environment. Analysts Inc. www.analystsinc.com 800-336-3637 FLUID STORAGE AND DISPENSING SYSTEM Fluidall's full-featured storage, filtration and dispensing system can draw fluids from external sources, filter and then store them in a clean and dry environment. The self-contained, modular storage system allows you to manage to your target ISO cleanliness specifications and polish fluids through high-capacity water removal and particulate filters. Filtered fluids can be dispensed to transport containers via pressure taps or to external totes via quick connects. The stackable design helps to optimize lube room space and eliminate costly drums. Fluidall www.fluidall.com 800-849-0591 FILTER CART The OilMiser 1500 Series high-viscosity filter cart combines balance and brawn with its all-aluminum design. Compact and portable, it uses a 0.5-horsepower 1,140-rpm electric motor and a close-coupled ripple-free pump. A low flow rate of 1.9 gallons per minute minimizes filter media stress and maximizes contamination retention on the single microglass oil filter. A larger ¾-inch suction hose comes with a ¾-inch quick disconnect and dust cover. The cart also includes a two-way selector valve for two independent flow paths for filtered and unfiltered oil output flows. JLM Systems www.oilmiser.com 888-736-8645 MOTOR OILS NanoSave N1 oils are a new series of motor oils and lubricants from N1 Technologies featuring advanced nanotechnology. The oils are designed to increase mileage, reduce friction heat and prevent wear by forming a protective shield around moving engine parts. This tribofilm, called NanoShield, slips into rough and creviced metal surfaces of engine parts to help prolong the operation and engine service life of vehicles. NanoSave N1 currently is available as an oil additive and lube booster in the form of motor oil, synthetic oil, bearing grease and transmission fluid additives. N1 Technologies www.N1Technologies.com 855-626-6728 www.machinerylubrication.com | May - June 2013 19

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication May June 2013