Machinery Lubrication

Machinery Lubrication May June 2013

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/136253

Contents of this Issue

Navigation

Page 24 of 59

of service to change hydraulic valves can mean a significant loss of time and money. For instance, information from two construction firms showed a total possible cost of $66,000 per year for a 40-excavator fleet resulting from valve replacement. As these examples indicate, the cost of varnish can be high. Reduced efficiency can sometimes go undetected, and by the time this becomes obvious to the user, a significant amount of additional energy may have been consumed with the consequential impact on the environment. Additive Solutions Because hydraulic formulations are carefully balanced to meet original equipment manufacturer requirements, adding a new varnish-mitigating feature to the fluid's performance profile requires a unique solution. Fortunately, fluids are now available incorporating additive chemistry that reacts with the precursors to varnish, minimizing the formation of resinous films on system hardware. This clean technology will be a must-have for all industrial fluids. There are also additive systems that can remove varnish once it forms. Both of these options allow equipment owners and operators to optimize their systems to best achieve the three "E"s: economy, efficiency and environment. DyNAMIS® & DyNAMIS® MAXX FOR 2013 serious engineering for serious ApplicAtions. © 2013 BIJUR DELIMON INTERNATIONAL. ALL RIGHTS RESERVED. Features & BeneFits • injector and progressive divider models • output ~ 4,350 pSi / 360° orientation • Smart, rugged, modular design • 2 to 20 liter reservoir capacity • 12VdC, 24VdC or 110/240VaC • available on-board pco controller • + 70C to -30C operation; grease or oil • durability tested and built to last DIRECT SALES HOTLINE industrial Applications industrial machinery UniTED STATES Wind turbines (+1) 800-631-0168 mobile Vehicles transfer lines China | FranCe | Germany | United KinGdom | ireland | india | Spain | rUSSia CORPORATE HEADQUARTERS 2250 perimeter parK dr., SUite 120, morriSVille, nC 27560 SALES@BIJURDELIMON.COM www.machinerylubrication.com | May - June 2013 | 23

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication May June 2013