Powder and Bulk Engineering

PBE0821BG

Issue link: https://www.e-digitaleditions.com/i/1398967

Contents of this Issue

Navigation

Page 9 of 192

August 2021 / 7 DRYING American Drying Consultants 2800 Rice St., Ste. 302 St. Paul, MN 55113 651-263-3697 jjwalshpe@ameridrycon.com www.ameridrycon.com Contact: John J. Walsh Specialty: Drying expert for direct- contact convection dryers (including column dryers, flash dryers, fluid-bed dryers, hopper dryers, rotary dryers, and spray dryers) and indirect- contact conduction dryers (including disc dryers, paddle dryers, screw dryers, spiral dryers, and rotary blender dryers). Consulting work for drying applications, such as ways to increase dryer throughput, decrease dryer heat loads, convert from open- to closed-cycle drying circuits, investigate causes for dryer failures, eliminate or control dryer fires, and improve product quality. Powder Processing Solutions 474 Waterbury Circle Cincinnati, OH 45231 513-503-8053 www.powderprocessingsolutions.com Contact: Jim Davis Specialty: Expert powder system analysis to optimize efficiency and reliability. Solids Flow Design 3330 County Rd. 245 Florence, TX 76527 512-296-8154 bcox@solidsflowdesign.com Contact: Brian D. Cox Specialty: Bulk solids flow and handling, including testing, analysis, review of proposed processes, troubleshooting, and design of new and retrofit equipment. The Wolfson Centre for Bulk Solids Handling Technology University of Greenwich Central Ave. Chatham Maritime, Kent ME4 4TB +44-(0)-20-8331-8646 wolfson-enquiries@gre.ac.uk www.bulksolids.com Contact: Richard Farnish Specialty: Consulting, research, and educational services in all aspects of powder and bulk solids handling technology. COATINGS KTA-Tator 115 Technology Dr. Pittsburgh, PA 15275 412-788-1300 info@kta.com www.kta.com Contact: Nancy Dewey Specialty: Provides comprehensive coating consulting services, including coating failure analysis, laboratory testing, expert witness service, corrosion surveys, and coating system evaluations; technical specification and contract document development; environmental, health, and safety consulting services; contract management; in-process inspection of surface preparation and coating applications; and training. John Wing, PE 1121 Waters Edge Dr. Lakeland, FL 33801 863-666-6555 johnwingpe@verizon.net www.phosacid.com Contact: John Wing Specialty: Phosphoric acid and phosphate fertilizer technology. K-State Bulk Solids Innovation Center 607 N Front St. Salina, KS 67401 785-404-4918 bsic@k-state.edu www.bulk-solids.k-state.edu Contact: Todd Smith Specialty: Assisting industry with bulk solid issues, material properties testing, education, full-scale testing, scaleups, research, and consulting. Material Flow Solutions 5921 N County Rd. 225 Gainesville, FL 32609 352-379-8879 kjohanson@matflowsol.com www.matflowsol.com Contact: Kerry Johanson Specialty: Bulk solids flow and handling, including material property testing, segregation and attrition analysis, design of new and retrofitted systems, troubleshooting, training, and seminars. Porcupine Engineering Services 316 Spruce St. S Timmins, ON P4N 2M9 705-235-2110 brian.emblin@pes-inc.ca www.pes-inc.ca Contact: Brian Emblin Specialty: Brownfields engineering and design for the mining, forestry, and power generation industries. Powder Processing 306-101 Winding Brook Ln. Bradenton, FL 34212 631-868-0102 rkkloss@aol.com www.powderprocessinginc.com Contact: Richard K. Kloss Specialty: All aspects of powder manufacturing for the food, nutritional, pharmaceutical, and chemical industries, including cryogenic processing, grinding, micronization, blending, spray chilling, classifying, screening, drying, flaking, spray drying, granulating, bagging, powder characterization, and cGMP. Company also deals with process development and plant troubleshooting.

Articles in this issue

Links on this page

view archives of Powder and Bulk Engineering - PBE0821BG