Issue link: https://www.e-digitaleditions.com/i/856285
Professional & Technical Education Certificate & Degree Programs + Indicates course has prerequisites and/or co-requisites. ++ Indicates any module suffixed courses. 153 5. Identify State regulations for the safe operation of equipment, hand and power tools, tool/equipment components and functions including operating procedures and precautions, including OSHA regulations for safety and health. (CRP101, CRP102, CRP103, CRP123, CRP124, CRP231, CRP232, CRP233, CRP241, CRP242, CRP244) 6. Apply formulas and calculate estimates, linear dimensions, lengths, quantities, unit conversion, scales and measuring tapes, the Pythagorean Theorem. (CRP101, CRP103, CRP104, CRP121,CRP123, CRP124, CRP231, CRP232, CRP233, CRP242, CRP244) 7. Utilize proper site access/egress, maintenance of tools and materials and awareness of emergency evacuation procedures. (CRP101, CRP233) 8. Identify hazard placards, symbols, labels, documents, safety data sheets and interpret chemical labeling. (CRP102) 9. Identify proper first aid and cardiopulmonary resuscitation (CPR)/ automated external defibrillator (AED) techniques needed in health emergencies including levels of emergencies. (CRP102) 10. Identify lift truck types and components/hardware, maintenance, storage, applicable OSHA regulations, safety hazards and precautions for equipment, various forms, scaffolds, proper safety inspection and operation. (CRP102, CRP124, CRP241, CRP243) 11. Interpret drawings and identify terms, proper construction methods, tools and equipment to calculate horizontal/vertical layout and categorize print according to specific characteristics. (CRP103, CRP104, CRP121, CRP122, CRP123, CRP124, CRP231, CRP232, CRP233, CRP243, CRP244) 12. Apply appropriate tool/equipment manipulative techniques, framing components and material types to complete wall/roof construction including proper Atlas or Symons wall forms, fastener placement, bracing, and driving techniques. (CRP103, CRP104, CRP123, CRP233) 13. Assemble and disassemble scaffolds, boom/scissor/aerial lift components implementing applicable OSHA regulations pertaining to safe working load limits, erection, inspections and operation. (CRP103, CRP104, CRP123, CRP243) 14. Identify drawing methods used to create prints and label standard views used in orthographic projection including conventional lines, symbols and dimensioning methods, location of beginning and ending measuring points. (CRP121, CRP122) 15. Identify parts, tools, components and define the nomenclature, codes, and types of concrete box girder bridges and forms. (CRP122) 16. Identify the purpose and use of cofferdams, the difference of precast and pre-stressed bridge construction and construction sequence. (CRP122) 17. Demonstrate locating of layout footing, abutment and pier details and the purpose of release agents and importance of properly cured concrete. (CRP122) 18. Practice set up of building line at ninety degrees, optical equipment and level and use sight target to elevate and level formwork. (CRP124) 19. Identify terms and characteristics of form systems including types, function and application, proper layout procedures/techniques using building lines, take-off lists and elevation, installation techniques for edge form, inverted T foundation, ceiling joists, curb and gutter projects. (CRP124, CRP231) 20. Identify gable roof elements, hardware, terms, building codes, and safety considerations used on commercial construction including cut lists, angle layouts. CRP(231, CRP233) 21. Identify terms, definitions, types and characteristics of stairways, cabinets and form systems, including requirements for compliance with the Americans with Disabilities Act (ADA) regulations. (CRP232, CRP244) 22. Demonstrate proper method to install and secure roof truss sections including measuring and cutting techniques. (CRP233) 23. Label transit and laser level components including optical principles, level types, characteristics, operating principles and methods. (CRP234) 24. Identify classes, types, and sizes of typical doors including hardware, lockset installation, cutting method for door hinges, applicable building and fire codes. (CRP242) 25. Identify types, sizes, terms, material, components, hardware for wall cabinets including proper installation, alignment and inspection. (CRP244)