106
B u n d l i n g a n d S e c u r i n g
M o u n t s
E n g i n e e r e d F a s t e n i n g S o l u t i o n s
B u n d l e S e p a r a t i o n P r o d u c t s
8
w w w . h e l l e r m a n n . t y t o n . c o m
|
1 - 8 0 0 - 5 3 7 - 1 5 1 2
Dual Swivel Saddle Spacer
DSWS4
These saddle spacers are installed between two bundles (such as
wires, cables, hoses, tubing, conduit, etc.) to separate them and
prevent chafing and wear. The mounts can be easily rotated by
hand, allowing the bundles to be crossed and rotated at any
angle. Cable ties, which secure the bundles, are used with the
mounts. The dual swivel saddle spacers accommodate cable ties
up to 1/2" wide.
The "H" profile of the saddles allows for broad surface contact
with the bundle, minimizing pinching and crushing of the
bundle, and it accepts a wide range of bundle diameters from
.25 inches to 3 inches.
The DSWS4 Dual Swivel Saddle Spacer provides a
.7 inch (17.8 millimeter) separation between bundles.
Friction tabs in the tie slots help hold the cable ties in place
during assembly.
The DSWS4 is two-shot molded with polyacetal and polyamide
6.6 heat stabilized materials.
swivels
H
L W
Patents Pending
Article No. Part No. Type
Bundle Ø
Minimum
Extraction
Strength
Length
(L)
Width
(W)
Height
(H)
Color
Pkg.
Qty.
Cable Tie
Series in. (mm) lb. (N) in. (mm) in. (mm) in. (mm)
151-06500 151-06500 DSWS4 T50 - T250
.25" - 3"
(6.35 - 76.2)
100 lb.
(445)
.93
(23.6)
.8
(20.3)
.71
(18) Black 2200
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Material Polyamide 6.6 heat stabilized (PA66HS)
Operating
Temperature
-40 °F to +221 °F (-40 °C to +105 °C) continuous
Flammability UL94 V2
Material Data
Material Polyacetal (POM)
Operating
Temperature
-40 °F to +185 °F (-40 °C to +85 °C) continuous
Flammability UL94 HB
Material Data
Product Selection
151-00644 151-00644 DSWS4 T50 - T250
.25" - 3"
(6.35 - 76.2)
100 lb.
(445)
.93
(23.6)
.8
(20.3)
.71
(18) Black 50
Dual Swivel Saddle Spacer
DSWS4
